EOL Products

SE5001A Series

This product has been discontinued. Please refer to SE5201 as the replacement. For detailed support, please refer to the notice or contact our product expert or your local agent.

  1-Port Industrial Serial Device Server, with Industrial EMC Protection supporting RS-232/RS-485/RS-422 Industrial EMC protection Rugged metal case with wall or DIN-Rail mount 10/100Mbps Fast Ethernet full duplex auto negotiation TCP Server/Client, UDP, Virtual COM and Tunneling modes supported Remotely monitor, manage, and control industrial field devices Configuration via Web Browser / Serial Console / Telnet Console / Windows Utility Remote firmware upgrade

Make Serial Devices Ready to the Network The Industrial Serial Server SE5001A is a cost effective gateway for Ethernet (TCP/IP) and serial signal communications; allowing almost any serial device to be connected to a new or existing Ethernet network. By encapsulating serial data and transporting it over Ethernet, SE5001A offers full-duplex and bi-directional data seamlessly between the serial port and the Ethernet network. Easy to Use Flexible configuration options enable this unit to be setup over Ethernet by Telnet, Web Browser, Serial Console, or our Windows Utility. Packed in a rugged metal housing for wall or DIN-Rail mount with 9~48VDC wide range power input, SE5001A is ideal for almost any industrial and manufacturing automation process. Atop Virtual COM software provides a virtual environment for applications when accessing SE5001A through TCP. Specially Designed for Automation Fields In industrial and manufacturing automation fields, SE5001A is used as a field device to connect the Ethernet through TCP/IP protocol directly. It is also specially designed for conjunction with PLCs, HMIs, Barcode Scanners, Data Terminals, Electronic Kanbans, Shop Floor Control Systems, and Pick-to-Light Systems.
Network Interface
Speed IEEE 802.3 10BaseT IEEE 802.3u 100BaseT(X)
Auto MDI/MDI-X Present
Connector ports RJ45 x 1
Serial Interface
Connector D-Sub9 RS-232/422/485 software selectable (DB models) 5.08mm 5-Pin Terminal block RS-232/422/485 software selectable (TB models)
Ports 1
Baud Rate 1,200bps ~ 230kbps software selectable
Data Bits 7, 8 software selectable
Stop Bits 1, 2 software selectable
Flow Control None, Xon/Xoff, RTS/CTS
Software
Protocols IPv4, ICMP, TCP, UDP, DHCP Client, SNMP, HTTP, Telnet, RFC2217
Configuration Atop Management Utility, Web UI, Telnet
VirtualCOM Windows/Linux redirection software
Link Modes - TCP Client Single destination or VirtualCOM
Link Modes - TCP Server 4 Connections; VirtualCOM or reverse Telnet
Link Modes - UDP Up to 4 Ranges IP
Power Value
Input Voltage 9 - 48VDC
Input Current (@ 9VDC) 0.30 A @ 9 VDC
Power Consumption Approximately 2.70 W (Max)
Connector 3-Pin 5.08mm Lockable Terminal Block
Reverse Polarity Protection Yes
Physical Characteristics Value
Dimension (W x H x D) 75 mm x 85 mm x 28 mm
Weight 200g
Installation Wall mount, DIN-Rail (optional)
Reset Button Yes
Environmental Limits
Operating Temperature 0°C ~ 60°C ( 32º ~ 140ºF )
Storage Temperature -40°C~85°C (-40°F~185°F)
Ambient Relative Humidity 5%~95%, 55°C (Non-condensing)
Certification Standard
Safety EN 60950-1: 2011 / IEC 60950-1:2009
EMC EN 55022: 2007, EN 55024: 2010, FCC Part 15 Subpart B Class A
RoHS 2 Yes
REACH Yes
Standard Item Test Value Level
IEC 61000-4-2 ESD Contact Discharge ±8kV 4
IEC 61000-4-2 ESD Air Discharge ±15kV 4
IEC 61000-4-3 RS Radiated (enclosure) 10 V/m 3
IEC 61000-4-4 EFT AC Power Port ±2.0kV 3
IEC 61000-4-4 EFT DC Power Port ±2.0kV 3
IEC 61000-4-4 EFT Signal port ±2.0kV 4
IEC 61000-4-5 Surge AC Power Port (L-2-L) ±2.0KV 4
IEC 61000-4-5 Surge AC Power Port (L-2-E) ±4.0KV 4
IEC 61000-4-5 Surge DC Power Port (L-2-L) ±0.5KV 2
IEC 61000-4-5 Surge DC Power Port (L-2-E) ±1.0KV 2
IEC 61000-4-5 Surge Signal Port (L-2-E) ±2.0KV 3
IEC 61000-4-6 CS AC Power Port 10 V rms 3
IEC 61000-4-8 PFMF Enclosure 10 A/m 3
IEC 61000-4-11 DIP AC Power Port - -
Certification Standard
Shock IEC 60068-2-27
Drop IEC 60068-2-32
Vibration IEC 60068-2-64
Warranty 5 Years
MTBF TBD
MODEL NAME PART NUMBER DESCRIPTION
SE5001A 1P1SE5001A0001G 1-port Industrial Serial Device Server, D-Sub
SE5001A-TB 1P1SE5001A0002G 1-port Industrial Serial Device Server, Terminal Block　
MODEL NAME PART NUMBER DESCRIPTION
UN315-1212 (US-Y) 50500151120003G Y-Type power adapter, 100~240VAC input, 1.25A @ 12VDC output, US plug, LV6
UNE315-1212 (EU-Y) 50500151120013G Y-Type power adapter, 100~240VAC input, 1.25A @ 12VDC output, EU plug, LV6
ADP-DB9(F)-TB5 59906231G Female DB9 to Female 3.81mm TB5 Converter
DK-25 30200000000022G Plastic DIN Rail Kit

Datasheet

VERSION NAME TIME SIZE DOWNLOAD
v2 Datasheet EN 2017-06-30 2.08 MB

Manual

VERSION NAME TIME SIZE DOWNLOAD
v1.1 SE5001A User Manual 2017-04-27 1.95 MB

Quick Start Guide

VERSION NAME TIME SIZE DOWNLOAD
v1.7 SE5001-SE5001A Quick Start Guide 2017-10-02 208.40 KB

Firmware

VERSION NAME TIME SIZE DOWNLOAD
v3.609 SE5001-SE5002-SE5002D Firmware v3.609 2017-04-21 189.03 KB

Utility

VERSION NAME TIME SIZE DOWNLOAD
v5.60 Management Utility for Windows 2021-01-18 23.65 MB
1 older version

Test reports

VERSION NAME TIME SIZE DOWNLOAD
SE5001A Declarations of Conformity 2023-03-10 436.70 KB

You may also like

MB5408A Series

This product has been discontinued. Please refer to MB5908 as the replacement. For detailed support, please refer to the notice or contact our product expert or your local agent.

EHG6308 Series

This product has been discontinued. Please refer to EHG6408 & EHG6410 as the replacement. For detailed support, please refer to the notice or contact our product expert or your local agent.

MB5408A2 Series

This product has been discontinued. Please refer to MB5908 as the replacement. For detailed support, please refer to the notice or contact our product expert or your local agent.

LM28-H3S-TI-N