New
SE5901B SDK Series
SE5901B SDK Series
SE5901B SDK Series
SE5901B SDK Series
SE5901B SDK Series
SE5901B SDK Series
SE5901B SDK Series
SE5901B SDK Series
SE5901B SDK Series
SE5901B SDK Series
SE5901B SDK Series
SE5901B SDK Series
SE5901B SDK Series

SE5901B SDK Series


3G/4G LTE Cellular to Ethernet and Serial Secure Embedded Edge Computer

  • Ideal for IoT and IIoT applications; supports Node-RED and dashboard
  • Extensive 3G and LTE Band Support:
    - EU: 2100/1800/850/2600/900/800MHz (B1/B3/B5/B7/B8/B20)
    - US: 1900/AWS/850/700/700/1900MHz (B2/B4/B5/B13/B17/B25)
  • High-performance IPsec VPN throughput; data-rate up to 37.9Mbps*
  • Wide temperature range for Industrial-grade performance
  • 1 x 10/100/1000Mbps Ethernet port
  • 1 x RS-232/485 port – baud rate up to 921.6 Kbps
  • 1 x USB2.0 high speed OTG port; 1 x Port USB Power-only port
  • 2 x Digital Inputs; 2 x Relays in the I/O version
  • Additional embedded power-bank for fault-relay capability in B Version

* test carried out with one VPN-IPsec Tunnel, Peer-to-Peer mode, Ethernet cable.

Providing connectivity for the Internet of Things
ATOP’s Industrial Embedded Computer is your ideal flexible Gateway to the Internet of Things. It provides 3G/4G LTE, Serial, Ethernet and Cellular connectivity and additional I/Os and interfaces that can unlock your potential. Based on your specific application, it allows almost any serial device to be connected, providing and retrieving the data you need to and from the cloud, no matter what provider you’re using.

Programmability
Write your customized application in C language and run it on its powerful Industrial low-power 800MHz ARM Cortex A8 TI Sitara AM3354 CPU. Make flexible use of your peripherals, no matter storage, SMS, Serial, I/Os and USB are needed.
SE5901B is available as a Standard SDK or Node-RED version.
The Node-RED version, embedding a Node-RED micro-SD card, adds to the powerful hardware platform, the possibility add the ATOP-Customized Node-RED environment and an user-friendly Device Configuration UI. Node-RED, an open source Building-Block programming environment, will allow you to build your IoT application from an user-friendly, hardware-tailored application design environment and dashboard.

Rugged and flexible for advanced developments
SE5901B embeds high EMC protection, wide temperature operation, programming and installation flexibility in one device. A dedicated I/O version provides 2 Digital Inputs and 2 Digital Outputs, GPS version provides Global positioning system geolocation and, specifically for the Internet of Things, a “B” version provides additional 15 seconds power during a power failure, allowing the device to relay back to the host the failure. This is Industry 4.0.

SE5901B (SDK) block diagram

 

Application
The IoT (Internet of Things) or IIoT (Industrial Internet of Things) is a trending topic these days. It’s all about bringing devices, sensors, actuators, data and commands to the cloud, with the ultimate goal to improve the quality of life, the services Smart Cities can offer, saving energy or saving money. This requires two things: to vehiculate the collected data to the cloud in a format that can be recognized and processed and to process, compute and analyze all this amount of data in real time.
It is not a concept far from reality. Imagine you’d like to bridge a Modbus Sensor to the cloud. And you’d like to have the application running on the cloud to be able to process multiple sensors’ data, and to trigger some event in some specific stations along the network. You may also have the need to override the cloud control and manage the application locally. Any application has its story.

Here at ATOP, we understand these different needs and we are providing you different working models, based on what your needs are.

Use the Standard SDK, programmable embedded computer if:

  • You are familiar with Linux OS
  • You have ANSI C programming skills
  • Your application is strictly time/ performance sensitive
  • Your application has very critical exception handling requirements


Our SDK products provide:

  • Ported, proven and tested peripherals (such as I/Os, Ethernet, Serial, Wireless) and integrated drivers
  • ATOP customized Linux Kernel and network protocols
  • Ported, debugged and proven third party applications (such as Apache webserver)
  • Utilities and APIs to control the hardware in an easy and effective way
  • Example of source code


Use ATOP’s Node-RED version with the embedded Micro-SD card if:

 

  • You’re hands-on, with a good understanding of protocols, data formats
  • You have some basic Javascript knowledge
  • You’re looking for a simple, user-friendly and effective way to deploy your applications to the cloud, with a user friendly monitoring dashboard
  • You don’t have strict performance requirements, and exception handling is not critical

Our NodeRED Micro SD Card provides:

  • Node-RED visual application development environment and dashboard, with automatic start on device boot-up, Node.JS based
  • ATOP-customized dedicated Web-UI for user friendly device set-up, allowing you to create VPN tunnels, set-up the network or the Cellular settings, date/ time, diagnostics and much mode without using Linux command line.
  • Different level of security to allow developers to access development  environment and users to access dashboard only
  • Customized Node-RED APIs (blocks) that will allow you to fully control ATOP powerful hardware and control inputs, relays, Buzzer, diagnostics and much more
  • Integrated Modbus and MQTT stacks, for seamless communication with field devices and cloud
  • Integrated AWS, Azure, Google and IBM Bluemix Nodes.

 

NodeRED development Enrivonment

Wireless Interface   
StandardGSM/ GPRS/ EDGE/ UMTS/ HSPA+/ SCDMA/ LTE
Wireless ModuleEU version: Quectel EC25-E
US version: Quectel EC20-A
Antennas/ SIM card1 (3G) or 2 (4G) - Included. Internal SIM card slot (x1)
Band OptionsVersionBandBands
EUFDD LTE2100/1800/850/2600/900/800MHz
(B1/B3/B5/B7/B8/B20)
TDD LTE2600/2300/2500MHz (B38/B40/B41)
WCDMA2100/850/900MHz (B1/B5/B8)
GSM900/1800MHz
USFDD LTE1900/1700/850/700/700bMHz
(B2/B4/B5/B12/B17)
UMTS1900/1700/850MHz (B2/B4/B5)
GSM850/1900MHz
Data RateLTE-FDDVersionBandDownlink SpeedUplink Speed
EULTE-FDD150 Mbps50 Mbps
LTE-TDD130 Mbps35 Mbps
DC-HSPA+42 Mbps5.76 Mbps
UMTS384 Kbps384 Kbps
TD-SCDMA4.2 Mbps2.2 Mbps
EDGE236.8 Kbps236.8 Kbps
GPRS85.6 Kbps85.6 Kbps
USLTE-FDD100 Mbps50 Mbps
LTE-TDD61 Mbps18 Mbps
DC-HSPA+42 Mbps5.76 Mbps
UMTS384 Kbps384 Kbps
TD-SCDMA4.2 Mbps2.2 Mbps
EDGE236.8 Kbps236.8 Kbps
GPRS85.6 Kbps85.6 Kbps
GNSS Interfaces
Supported GNSSGPS, Glonass, Beidou
Connector1x SMA
Hardware Specifications 
CPUTexas Instruments Sitara ARM Cortex A8 AM3354 800MHz
FlashSDK version: 32 MB NOR Flash (supports up to 128 MB)
Node-RED version: 64 MB NOR Flash
RAMSDK version: 128 MB DDR2 (supports up to 256 MB)
Node-RED version: 256 MB DDR2
EEPROM24LC64
WatchdogADM706
Real Time Clock (RTC)Yes - with external chip
BuzzerYes
Console PortYes - on-board connector
Reset ButtonYes
Network Interface
StandardsIEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3ab for 1000BaseT(X)
Ethernet Ports1x 10/100/1000BASE-TX RJ-45
Serial Interface
ConnectorD-Sub9 RS-232/485 software selectable (DB model)
14-Pin 5.08mm Terminal Block (integrated with DI/DOs)
Ports1 port RS-232/485 (2-wire) - (DB Model)
1 port RS-232/485 (2-wire) and 1 port RS-232 (IO model only)
Baud Rate50 ~ 921,600bps
Data Bits7, 8
Stop Bits1, 2
Flow ControlNone, Xon/Xoff, RTS/CTS (RS-232 only)
Other interfaces
USB ports2 x USB A Type (USB 2.0): 1-port High-Speed OTG + 1-port power only
SD cardMicro-SD card slot (internal)
Digital Inputs (DIs)2 channels photo coupler isolated digital input
Digital Outputs (DOs)2 channels relay outputs (normal open; 2A@24VDC)
Power
Input Voltage9-48 VDC
Connector3-Pin 5.08mm Lockable Terminal Block
Power Consumption0.6A @ 12VDC (7.2 W Max)
Reverse Polarity ProtectionYes
Mechanical
HousingIP30 protection, SPCC metal housing
Dimensions(W x H x D)32mm x 122mm x 92mm
InstallationDIN-Rail or Wall-Mount (optional kit)
Weight400 g
Reset ButtonYes
Environmental
Operating Temperature-40°C~70°C (-40°F~158°F)
Storage Temperature-40°C~85°C (-40°F~185°F)
Ambient Relative Humidity5%~95%, (Non-condensing)
Software
BootloaderU-boot 2014.07
Linux kernelLinux 3.14.26
Linux toolchainLinux 32 bits toolchain gcc (C/C++ PC cross compiler), glibc
Linux sample codeRS232, RS485, RTC, watchdog, LED, Buzzer, Button, network socket
Additional features
(Node-RED version only)
Pre-installed Node-RED Micro-SD card, with auto-run on startup. Dedicated Web UI for device settings. Integrated SMS alarm, ARP, DHCP Client/Server (NAT enabled), IPv4, NTP/SNTP client, SNMP v1/v2c/v3, OpenVPN client/server, IPsec, and PPTP.
CertificationStandard
SafetyEN 60950-1:2006, UL60950-1, IEC60950-1
EMC/RadioFCC 47 CFR PART 22H, FCC 47 CFR PART 24H, FCC PART 27L, FCC Part 15B,
EN301489-1, EN301489-7, EN301489-19, EN301489-24, EN301489-52, EN301511,
EN301908-1, EN301908-2, EN303413
EN55032,EN55024,
EN61000-6-2, EN61000-6-4
RoHS 2Yes
StandardItemTestValueLevel
IEC 61000-4-2ESDContact Discharge
Air Discharge
±6KV
±8KV
3
IEC 61000-4-3RSEnclosure Port10(V/m), 80-1000MHz3
IEC 61000-4-4EFTAC Power Port
DC Power Port
Signal Port
±2.0KV
±2.0KV
±1.0KV
3
3
3
IEC 61000-4-5SurgeDC Power Port
DC Power Port
Signal Port
Line-to Line±1.0KV
Line-to Earth±2.0KV
Line-to Earth±2.0KV
3
3
3
IEC 61000-4-6CS0.15-80MHz10V rms3
IEC 61000-4-8PFMF(Enclosure)AC 50Hz 10A/m3
IEC 61000-4-11DIPAC Power Port>95%,Reduction,0.5period
30%, Reduction,25 period
>95%,Reduction,250 period
-
CertificationStandard
ShockMIL-STD-810G Method 516.7
DropMIL-STD-810G Method 516.7
VibrationMIL-STD-810G Method 514.7
Warranty5 Years
MTBF20.88 years according to MIL-HDBK-217F (Model average)
MODEL NAMECELLULARSERIAL PORTSI/OOTHER
SE5901B-D3G-US (SDK) or -NR (Node-RED)3G (US)1 (DB9)--
SE5901B-IO-D3G-US (SDK) or -NR (Node-RED)3G (US)1 RS232/485 +1 RS232 (TB14)2/2
SE5901B-IO-D3G-GPS-US (SDK) or -NR (Node-RED)3G (US)1 RS232/485 +1 RS232 (TB14)2/2GPS
SE5901B-4G-US (SDK) or -NR (Node-RED)4G (US)1 (DB9)
SE5901B-IO-4G-US (SDK) or -NR (Node-RED)4G (US)1 RS232/485 +1 RS232 (TB14)2/2
SE5901B-IO-4G-GPS-US (SDK) or -NR (Node-RED)4G (US)1 RS232/485 +1 RS232 (TB14)2/2GPS
SE5901B-4G-B-US (SDK) or -NR (Node-RED)4G (US)1 (DB9)Battery
SE5901B-IO-4G-B-US (SDK) or -NR (Node-RED)4G (US)1 RS232/485 +1 RS232 (TB14)2/2Battery
SE5901B-IO-4G-GPS-B-US (SDK) or -NR (Node-RED)4G (US)1 RS232/485 +1 RS232 (TB14)2/2GPS - Battery
SE5901B-D3G-EU (SDK) or -NR (Node-RED)3G (EU)1 (DB9)
SE5901B-IO-D3G-EU (SDK) or -NR (Node-RED)3G (EU)1 RS232/485 +1 RS232 (TB14)2/2
SE5901B-IO-D3G-GPS-EU (SDK) or -NR (Node-RED)3G (EU)1 RS232/485 +1 RS232 (TB14)2/2GPS
SE5901B-4G-EU (SDK) or -NR (Node-RED)4G (EU)1 (DB9)
SE5901B-IO-4G-EU (SDK) or -NR (Node-RED)4G (EU)1 RS232/485 +1 RS232 (TB14)2/2
SE5901B-IO-4G-GPS-EU (SDK) or -NR (Node-RED)4G (EU)1 RS232/485 +1 RS232 (TB14)2/2GPS
SE5901B-4G-B-EU (SDK) or -NR (Node-RED)4G (EU)1 (DB9)Battery
SE5901B-IO-4G-B-EU (SDK) or -NR (Node-RED)4G (EU)1 RS232/485 +1 RS232 (TB14)2/2Battery
SE5901B-IO-4G-GPS-B-EU or -NR (Node-RED)(SDK)4G (EU)1 RS232/485 +1 RS232 (TB14)2/2GPS - Battery
SE5901B-DB (SDK) or -NR (Node-RED)-1 (DB9)
SE5901B-IO (SDK) or -NR (Node-RED)-1 RS232/485 +1 RS232 (TB14)2/2
SE5901B-IO-B (SDK) or -NR (Node-RED)-1 RS232/485 +1 RS232 (TB14)2/2Battery
MODEL NAMEPART NUMBERDESCRIPTION
UN315-1212 (US-Y)50500151120003GY-Type power adaptor, 100~240VAC input, 1.25A @ 12VDC output, US plug, LV6
UNE315-1212 (EU-Y)50500151120013GY-Type power adaptor, 100~240VAC input, 1.25A @ 12VDC output, EU plug, LV6
ADP-DB9(F)-TB559906231GFemale DB9 to Female 3.81 TB5 Converter
WMK-315-Black70100000000050GBlack Aluminum Wall Mount Kit
WL-7200-V1 WLAN Dongle59908002G802.11b/g/n 300M , USB Dongle

Datasheet

VersionNameTimeSizeDownload
v0.7Datasheet EN2019-07-15488.64 KB
v0.5Datasheet EN2018-08-24646.5 KB

Manual

VersionNameTimeSizeDownload
v1.2SE59XX SDK User Manual2018-05-022.25 MB
v1.1SE59XX SDK User Manual2018-02-052.41 MB
v1.4SE59XX Node-RED User Manual2019-04-225.72 MB
v1.2SE59XX Node-RED User Manual2018-08-245.59 MB

Hardware Installation Guide

VersionNameTimeSizeDownload
v1.0SE5901B/MB5901B/PG5901B Hardware Installation Guide2017-06-095.91 MB