Serial Servers

SE5908A SDK Series

IEC61850-3 certified Industrial Embedded Computer, with up to 16 Serial Ports

  • IEC 61850-3 certified for easy setup in IEC 61850-3 substations
  • Ideal for IoT and IIoT applications
  • Wide -40°C to +80°C temperature range; Industrial EMC protection
  • 6 x 10/100Mbps RJ45 ports or 6 x 100Mbps SFP Slots
  • Up to 16 x RS-232/422/485 ports – selectable baud rate up to 921.6 Kbps
  • 3 kV optional isolation on the serial ports
  • Internal SD Card slot
  • ATOP customized Linux SDK environment with reliable APIs
  • Redundant Power Input for fault protection: either 24~48 VDC or High-Voltage AC/DC (100~240VAC or 100~370VDC)
  • Rugged metal housing in 1U Rack-mount (rack-mount kit included)

Providing connectivity for the Internet of Things ATOP’s Industrial Embedded Computer is your ideal flexible Gateway to the Internet of Things, specifically tailored for advanced Power Substation applications. It provides Serial, Ethernet connectivity and interfaces that can unlock your potential. Based on your specific application, it allowing almost any serial device to be connected, providing and retrieving the data you need to and from the cloud, no matter what provider you’re using.   Programmability Write your customized application in C language and Run it on its powerful Industrial low-power 1GHz ARM Cortex A8 TI Sitara AM3352 CPU. Make flexible use of your peripherals, no matter storage, Serial, or USB are needed. SE5908A is available as a SDK/BSP. The SDK development environment reserves the maximum flexibility. Bottom to top editable software architecture allowed easily to customize or add the IoT applications for different using scenarios. Included Linux kernel source extend the capability of the kernel layer. Changeable WEB pages allowed to easily customize proprietary style. With the SE5908A SDK, it will extend your possibility while building your IoT applications.   Rugged and flexible for advanced developments SE5908A embeds high EMC protection, wide temperature operation, programming and installation flexibility in one device. The IEC61850-3 certified hardware makes it the most advanced Computing option, while the dual power supply provides additional redundancy in case of power failure. High-Voltage option makes the device suitable for High-Voltage AC or DC inputs (100~240 VAC or 100~370VDC) that are common in substation environments., without additional cabling and power supply.   SE5908A (SDK) block diagram   Application The IoT (Internet of Things) or IIoT (Industrial Internet of Things) is a trending topic these days. It’s all about bringing devices, sensors, actuators, data and commands to the cloud, with the ultimate goal to improve the quality of life, the services Smart Cities can offer, saving energy or saving money. This requires two things: to vehiculate the collected data to the cloud in a format that can be recognized and processed and to process, compute and analyze all this amount of data in real time. It is not a concept far from reality. Imagine you’d like to bridge a Modbus Sensor to the cloud. And you’d like to have the application running on the cloud to be able to process multiple sensors’ data, and to trigger some event in some specific stations along the network. You may also have the need to override the cloud control and manage the application locally. Any application has its story. Here at ATOP, we understand these different needs and we are providing you different working models, based on what your needs are.   Use the Standard SDK, programmable embedded computer if:
  • You are familiar with Linux OS
  • You have ANSI C programming skills
  • Your application is strictly time/ performance sensitive
  • Your application has very critical exception handling requirements
  Our SDK products provide:
  • Ported, proven and tested peripherals (such as I/Os, Ethernet, Serial, Relays) and integrated drivers
  • ATOP customized Linux Kernel and network protocols
  • Ported, debugged and proven third party application
  •  Utilities and APIs to control the hardware in an easy and effective way
  • Opened software architecture to create your own system image
  • Linux source code to extend the kernel capability
  • Modifiable WEB contents to customize proprietary WEB style
  • Example of source code
     
Hardware Specifications  
CPU Texas Instruments Sitara ARM Cortex A8 AM3352 1000MHz
Flash 32 MB NOR Flash (customizable upon request up to 64 MB)
RAM 256 MB DDR3 (customizable upon request up to 1 GB)
EEPROM 24LC64
Watchdog ADM706
Real Time Clock (RTC) Yes - with external chip
Buzzer Yes
Console port Yes - RJ45 Serial Console
Reset Button Yes
Network Interface  
Standards IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) and 100BaseF(X)
Ethernet Ports 6x 10/100 BASE-T(X) RJ45 or 6x 100 BASE-F(X) SFP Slots (SFP version)
Ethernet Switch Embedded 8-Ports Fast-Ethernet Switch (configurable). Each port can work as single Subnet or as Switch
Serial Interface  
Connector DB version: D-Sub9 (DB9) connector TB and SiS version: 5-Pin Terminal Block (5.08mm)
Ports SE5908A: 8-ports (RS-232 (supports only 5-pin mode)/RS-422/RS-485) SE5916A: 16-ports (RS-232 (supports only 5-pin mode)/RS-422/RS-485)
Serial Console 1x Serial Console port (RJ45)
Serial Port Isolation 3 kV (SiS version only)
Pull-high / Pull-low /Term. resistors Software Selectable
Baud Rate 50 ~ 921,600bps
Data Bits 5, 6, 7, 8
Stop Bits 1, 2
Flow Control None, Xon/Xoff, RTS/CTS (RS-232 only)
Other interfaces  
USB ports No
LCM Matrix Programmable LCM Matrix with 5-buttons
SD Card SD card slot (internal)
Relay Output 1x 1A@30VDC (Normal open)
Software
Bootloader U-boot 2014.07
Linux kernel Linux 3.14.26
Linux toolchain Linux 32 bits toolchain gcc (C/C++ PC cross compiler), glibc
Linux sample code RS232, RS485, RTC, watchdog, LED, Buzzer, Button, network socket
Power
Rated Aupply Voltage Redundant 24-48 VDC or Redundant 100-240 VAC/ 100-370 VDC (HV Series)
Input Voltage Range Redundant 19.2-52.8 VDC or Redundant 85-264 VAC/ 100-370 VDC (HV Series)
Input Current 0.73 A @ 24 VDC 0.35 A @ 100 VAC 0.20 A @ 100 VDC
Power Consumption Approximately 20 W
Connector 10-Pin Terminal Block
Power Redundancy Yes
Reverse Polarity Protection Yes
Environmental
Operating Temperature -40°C to +80°C (-40°F to +176°F)
Storage Temperature -40°C~85°C (-40°F~185°F)
Ambient Relative Humidity 5%~95%, 55° (Non-condensing)
Mechanical
Housing IP30 protection, SPCC metal housing
Dimensions(W x H x D) 440.6 x 44 x 309 mm (1U Rack-mount)
Installation 19’’ Rack-Mount (Kit included)
Weight 4,000g
Reset Button Yes
Certification Standard
Safety EN61010-1, EN 61010-2-201
EMC FCC Part 15, Subpart B, Class A, EN 55032, Class A, EN 61000-6-2, EN 61000-3-2, EN 61000-3-3, EN 55024, EN 61000-6-4, IEC 61850-3 / IEEE 1613
RoHS II Yes
REACH Yes
Standard Item Test Value Level
IEC 61000-4-2 ESD Contact Discharge ±8kV 4
IEC 61000-4-2 ESD Air Discharge ±15kV 4
IEC 61000-4-3 RS Radiated (enclosure) 20 V/m 3
IEC 61000-4-4 EFT AC Power Port ±4.0kV 4
IEC 61000-4-4 EFT DC Power Port ±4.0kV 4
IEC 61000-4-4 EFT Signal Port ±4.0KV 4
IEC 61000-4-5 Surge AC Power Port (L-2-L) Line-to Line±2.0KV 4
IEC 61000-4-5 Surge AC Power Port (L-2-E) Line-to Earth±4.0KV 4
IEC 61000-4-5 Surge DC Power Port (L-2-L) Line-to Line±1.0KV 3
IEC 61000-4-5 Surge DC Power Port (L-2-E) Line-to Earth±2.0KV 3
IEC 61000-4-5 Surge Signal Port (L-2-E) Line-to Earth±4.0KV 4
IEC 61000-4-6 CS AC Power Port 10 V rms 3
IEC 61000-4-6 CS DC Power Port 10 V rms 3
IEC 61000-4-6 CS Signal Port 10 V rms 3
IEC 61000-4-8 PFMF Enclosure 100 A/m 1000 A/m (1sec.) 5 6
IEC 61000-4-11 DIP AC Power Port 30% reduction (Voltage Dips), 1 period 60% reduction (Voltage Dips), 50 period 100%, reduction (Voltage interruptions), 5 period 100% reduction (Voltage interruptions), 50 period -
Certification Standard
Shock MIL-STD-810F Method 516.5
Drop (Freefall) MIL-STD-810F Method 516.5
Vibration MIL-STD-810F Method 514.5 C1 & C2
RoHS Yes
MTBF SE5908A-6SFP-Sis-HV: 13.01 years; SE5916A-6SFP-Sis: 12.13 years
Warranty 5 years
MODEL NAME PART NUMBER DESCRIPTION ETHERNET PORTS SERIAL PORTS
SE5908A Contact Headquarter Ind. 8 Port Emb. Computer,10/100BASE-T(X) RJ45, DB9 2 (RJ45) 1 (DB9)
SE5908A-6SFP Contact Headquarter Ind. 8 Port Emb. Computer, 100BASE-FX SFP slot, DB9 2 (RJ45) 1 (TB5)
SE5908A-6SFP-HV Contact Headquarter Ind. 8 Port Emb. Computer, 100BASE-FX SFP slot, DB9 2 (RJ45) 1 (DB9)
SE5908A-6SFP-Sis Contact Headquarter Ind. 8 Port Emb. Computer, 100BASE-FX SFP,Isolated 2 (RJ45) 1 (TB5)
SE5908A-6SFP-Sis-HV Contact Headquarter Ind. 8 Port Emb. Computer, 100BASE-FX SFP,Isolated
SE5908A-6SFP-TB Contact Headquarter Ind. 8 Port Emb. Computer, 100BASE-FX SFP slot, TB5
SE5908A-6SFP-TB-HV Contact Headquarter Ind. 8 Port Emb. Computer, 100BASE-FX SFP slot, TB5
SE5908A-HV Contact Headquarter Ind. 8 Port Emb. Computer,10/100BASE-T(X) RJ45, DB9
SE5908A-Sis Contact Headquarter Ind. 8 Port Emb. Comp.,10/100BASET(X) RJ45, Isolated
SE5908A-Sis-HV Contact Headquarter Ind. 8 Port Emb. Comp.,10/100BASET(X) RJ45, Isolated
SE5908A-TB Contact Headquarter Ind. 8 Port Emb. Computer,10/100BASE-T(X) RJ45, TB5
SE5908A-TB-HV Contact Headquarter Ind. 8 Port Emb. Computer,10/100BASE-T(X) RJ45, TB5
Please note the following suffixes to be added to he chosen model name: SDK version suffix: (SDK) 2 1
MODEL NAME PART NUMBER DESCRIPTION
SDR-75-24 50500752240001G 75W/3.2A DIN-Rail 24VDC power supply with 88~264VAC / 124~370VDC input
CBL-RJ45(8P)-DB9(F)-90-C 50891971G 8-pin RJ45-DB9 debug cable, 90cm
ADP-DB9(F)-TB5 59906231G Female DB9 to Female 3.81 TB5 Converter
GDC-120 59906861G 120mm copper woven grounding cable
WMK-450-Black 70100000000052G Aluminum wall mount kit
LM28-C3S-TI-N 50708031G SFP Transceiver, 1250Mbps, 850nmVCSEL, Multi-mode, 550m, 3.3V, -20~85°C
LM38-A3S-TI-N 50708051G SFP Transceiver, 155Mbps, 1310nmLED, Multi-mode, 2km, 3.3V, -40~85C
LS38-A3S-TI-N 50709431G SFP Transceiver, 155Mbps, 1310nmFP, Single-mode, 30km, 3.3V, -40~85C
LS38-C3L-TI-N 50709441G SFP Transceiver, 1250Mbps, 1310nmDFB, Single-mode, 30km, 3.3V, -40~85°C
AXFD-1314-0523 522AXFD1314001G SFP Transceiver; 155Mbps, Multi-mode; 1310nm; 2km; -40°C to +85°C, DDMI
AXFD-1314-0553 522AXFD1314011G SFP Transceiver; 155Mbps, Single-mode; 1310nm; 30km; 40°C to +85°C, DDMI

Datasheet

VERSION NAME TIME SIZE DOWNLOAD
v1.1 Datasheet EN 2024-03-21 506.15 KB
4 older versions

Hardware Installation Guide

VERSION NAME TIME SIZE DOWNLOAD
v1.4 SE5908A Hardware Installation Guide 2024-01-30 3.37 MB
v1.3 SE5916A/MB5916A/PG5916A Hardware Installation Guide 2017-01-23 4.39 MB

Manual

VERSION NAME TIME SIZE DOWNLOAD
v0.1 AWS getting started guide 2021-08-19 907.53 KB
v0.5 SE59XX SDK User Manual 2021-04-13 2.55 MB
2 older versions
v1.4 SE59XX Node-RED User Manual 2019-04-22 5.72 MB
1 older version

Firmware

VERSION NAME TIME SIZE DOWNLOAD
v2.01 SE5908A Firmware 2021-03-22 10.28 MB

Utility

VERSION NAME TIME SIZE DOWNLOAD
v1.0 Linux Driver_x64 2021-03-29 210.16 KB

Test reports

VERSION NAME TIME SIZE DOWNLOAD
v1.0 SE-MB-PG5900A-08A-16A Certifications CE EN55032+EN55024 2019-11-20 1.71 MB
v1.0 SE-MB-PG5900A-08A-16A Certifications CE EN61000-6-4+EN61000-6-2 2019-11-20 1.46 MB
v1.0 SE-MB-PG5900A-08A-16A Certifications FCC 2019-11-20 1.21 MB
v1.0 SE-MB-PG5900A-08A-16A Certifications IEC61850-3 2019-11-20 3.70 MB
v1.0 SE-MB-PG5900A-08A-16A Certifications IEEE 1613 2019-11-20 946.69 KB
v1.0 SE-MB-PG5900A-08A-16A Certifications LVD 2019-11-20 5.32 MB

You may also like

SE5901 Series

1-Port Industrial Secure Wide-Temperature Serial Device Server

SE5908A Series

8-Port IEC61850-3 Certified Industrial Rack-Mounted Secure Serial Device Server

SE5908 SDK Series

8-Port Industrial Serial to Ethernet Embedded Computer

SE5908A SDK Series

IEC61850-3 certified Industrial Embedded Computer, with up to 16 Serial Ports