SE5002 Series

2-Port Serial Device Server supporting RS-232, RS-422 and RS-485 with Optional 2kV Serial Isolation and 15kV ESD Protection

  • Rugged metal case with DIN-Rail/wall-mount
  • 15KV ESD protection for serial signals
  • 10/100Mbps Fast Ethernet full duplex auto negotiation
  • Support multiple link mode with TCP server/client, UDP and Virtual COM mode
  • Monitor, manage and control industrial field devices remotely
  • Configuration: Built-in Web Server /Serial Console/ Telnet
  • Windows Based utility for IP configuration
  • Upgrade firmware from remote-PC via Ethernet
Discontinued
SE5002 Series
SE5002 Series

Make Serial Devices Ready to the Network
The Industrial Serial Server SE5002 is a 2-port gateway between Ethernet (TCP/IP) and serial signal communications. It allows almost any serial device to be connected to a new or existing Ethernet network. By encapsulating serial data and transporting it over Ethernet, SE5002 offers full-duplex, bi-directional data transmission transparent between serial port and Ethernet network.

Easy to Use
Flexible configuration options enable this unit to be setup over Ethernet by Telnet, Web browser, Serial Console, or other Windows utilities. Packed in a rugged metal housing for wall or DIN-Rail mount with 9~30VDC wide power input range, SE5002 is ideal for almost any industrial and manufacturing automation. Atop Virtual COM software provides existing Windows based
application to access serial device by mapping to remote serial
server via Ethernet.

Specially Designed for Automation Fields
In industrial and manufacturing automation fields, SE5002 is used as a field device to connect Ethernet through TCP/IP protocol directly. It is also specially designed for conjunction with PLCs, HMIs, Barcode Scanners, Data Terminals, Electronic Kanbans, Shop Floor Control Systems, and Pick-to-Light Systems.

Network Interface
SpeedIEEE 802.3 10BaseT
IEEE 802.3u 100BaseT(X)
Auto negotiationPresent
Auto MDI/MDI-XPresent
Connector portsRJ45 x 1
Serial Interface
ConnectorD-Sub9 (SE5002) or
5.08mm 5-Pin Terminal block (SE5002-S5SiS)
ModeRS-232/422/485 software selectable (SE5002) or
RS-422/485 software selectable (SE5002-S5SiS)
Ports2
Baud Rate1,200bps ~ 230kbps software selectable
Data Bits7, 8 software selectable
Stop Bits1, 2 software selectable
Flow ControlNone, Xon/Xoff, RTS/CTS
ESD Protection15kV ESD protection for serial signals
Software
ProtocolsIPv4, ICMP, TCP, UDP, DHCP Client, SNMP, HTTP, Telnet
ConfigurationAtop Management Utility, Web UI, Telnet
VirtualCOMWindows/Linux redirection software
Link Modes - TCP ClientSingle destination or VirtualCOM
Link Modes - TCP Server4 Connections; VirtualCOM or reverse Telnet
Link Modes - UDPUp to 4 Ranges IP
PowerValue
Input Voltage9 - 30VDC
Power ConsumptionApproximately 1.50 W (SE5002), or 3.00 W (SE5002-S5SiS)
Connector3-Pin 5.08mm Lockable Terminal Block
Reverse Polarity ProtectionYes
Physical CharacteristicsValue
Dimension (W x H x D)75 mm x 85 mm x 28 mm
Weight200g
InstallationWall mount, DIN-Rail (optional)
Reset ButtonYes
Environmental Limits
Operating Temperature0°C ~ 60°C ( 32º ~ 140ºF )
Storage Temperature-40°C~85°C (-40°F~185°F)
Ambient Relative Humidity5%~95%, 55°C (Non-condensing)
CertificationStandard
SafetyEN 60950-1: 2011 / IEC 60950-1:2009
EMCFCC Part 15, Subpart B, Class A, EN 55032:2012, EN 55024:2010
RoHS 2Yes
REACHYes
StandardItemTestValueLevel
IEC 61000-4-2ESDContact Discharge±4kV2
IEC 61000-4-2ESDAir Discharge±8kV3
IEC 61000-4-3RSRadiated (enclosure)3 V/m2
IEC 61000-4-4EFTAC Power Port±1.0kV2
IEC 61000-4-4EFTSignal port±0.5kV2
IEC 61000-4-5SurgeAC Power Port (L-2-L)±1.0KV3
IEC 61000-4-6CS0.15~80MHz3 V rms2
IEC 61000-4-8PFMFEnclosure1 A/m2
IEC 61000-4-11DIPAC Power Port>95% reduction-0.5period
30% reduction-25period
-
MODEL NAME PART NUMBERDESCRIPTION
SE50021P1SE500200001G2-port software selectable RS-232/422//485(DB9) serial server without adapter
SE5002-S5Sis1P1SE500200002G2-port software selectable RS-485/422(TB Lockable) photo isolation serial server without adapter
MODEL NAME PART NUMBERDESCRIPTION
UN315-1212(US-LDC) LV650500151120004GFor SE5002: Lockable DC jack (5.5/2.1/9.5 mm) power adapter, 100~240VAC input, 1.25A @ 12 VDC output, US plug, LV6
UNE315-1212(EU-LDC) LV650500151120014GFor SE5002: Lockable DC jack (5.5/2.1/9.5 mm) power adapter, 100~240VAC input, 1.25A @ 12 VDC output, EU plug, LV6
UN315-1212 (US-Y)50500151120003GY-Type power adapter, 100~240VAC input, 1.25A @ 12VDC output, US plug, LV6
UNE315-1212 (EU-Y)50500151120013GY-Type power adapter, 100~240VAC input, 1.25A @ 12VDC output, EU plug, LV6

Utility

Version Name Time Size Download
v5.60 Management Utility for Windows 2021-01-18 23.65 MB
v5.20 Management Utility for Windows 2016-10-28 16.21 MB

Firmware

Version Name Time Size Download
v3.609 SE5001-SE5002-SE5002D Firmware v3.609 2017-04-21 189.03 KB

Quick Start Guide

Version Name Time Size Download
v1.4 SE5002 Quick Start Guide 2017-10-09 225.56 KB

Datasheet

Version Name Time Size Download
v4 Datasheet EN 2017-06-30 2.44 MB

Manual

Version Name Time Size Download
v1.4 SE5002 User Manual 2017-04-27 2.59 MB

Test reports

Version Name Time Size Download
SE5002 Declarations of Conformity 2023-03-10 411.76 KB

I have read and agree to the Privacy Policy (art.13 and 14 of the GDPR - EU Regulation 2016/679).