New
IJG7001
IJG7001
IJG7001

IJG7001


Industrial 24V PoE, PoE+ Injector

  • Supports 802.3af (PoE), 802.3at (PoE+)
  • Up to 30W PoE power available
  • Redundant 12~57VDC Power input
  • Supports Mode A and Mode B, DIP-Switch Selectable
  • 2x 10/100/1000 BASE-T(X) ports (data in, data + PoE out)
  • IP30 aluminum with DIP-Rail / Wall mount (optional)
  • Operating range of -40°C to 75°C
  • EN 62368-1 and UL/IEC 62368-1 certified
  • Strong EMC Protection, up to Level 4

Multi-Protocol Support
This PoE Injector allows you to provide PoE Power to virtually any device. Besides legacy IEEE 802.3af (PoE) and IEEE 802.3at (PoE+) standards.

Mode A and Mode B selection
IJG7001 supports for 802.3af/at both Mode A and Mode B, allowing you through a simple DIP-Switch setting, to determine which pins to use to transfer the power and be flexible in adapting this device in virtually any requirement without the hassle of different part numbers.

Flexible power input
Equipped with a 12~57VDC wide-range redundant power input combined with a strong EMC protection, IJG7001 can be flexibly installed on machine-side, reducing the overall cost of ownership resulting in not needing an external, expensive, power supply.

EthernetStandard-
ComplianceIEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3af for Power-over-Ethernet (PoE - max 15.4W)
IEEE 802.3at for Power-over-Ethernet (PoE+ - max 30.0W)
PoE modesMode A/ Mode B DIP-Switch selectable
Mode A: PoE power through data pins (1,2,3,6)
Mode B: PoE power through spare pins (4,5,7,8)
RJ 45 Transmission Rate10/100/1000 Mbps
Auto MDI/MDI-XYes
PowerValue
PoE Voltage BoosterYes (Max support 30W)
Input Voltage12~57 VDC (power limitations)
Input CurrentMax 3.6A @12VDC
Max. Power Consumption30W
LEDValue
IndicatorsP1, P2, PoE
Physical CharacteristicsValue
HousingIP30 metal housing
Dimension (W x H x D)32 x 110 x 90 mm
Weight340 g
InstallationDIN-Rail, Wall mount (optional kit)
Environmental LimitsValue
Operating Temperature-40°C~75°C (-40°F~167°F)
Storage Temperature-40°C~85°C (-40°F~185°F)
Ambient Relative Humidity5%~95%, 55°C (Non-condensing)
CERTIFICATIONSTANDARD
SafetyEN60950-1, EN62368-1, UL60950-1:2006, UL62368-1
EMCFCC Part 15, Subpart B, Class A
EN 55032:2015 +AC:2016 Class A, EN 61000-3-2: 2014, Class A, EN 61000-3-3: 2013,
EN 61000-6-4: 2007+ A1: 2001 EN 55024: 2010+ A1:2015, EN 61000-6-2:2005+ AC : 2005
STANDARDITEMTEST POINTVALUELEVEL
IEC 61000-4-2ESDContact Discharge
Air Discharge
±6kV
±8kV
3
3
IEC 61000-4-3RS80-1000MHz
1. 4-2.0GHz
2. 0-2.7GHz
10(V/m)
3(V/m)
10(V/m)
3
3
3
IEC 61000-4-4EFTDC Power Port
Signal Port
±4.0KV
±2.0KV
4
4
IEC 61000-4-5SurgeDC Power Port
DC Power Port
Signal Port
Line-to Line±2.0kV
Line-to Earth±4.0kV
Line-to Earth±3.0kV
4
4
3
IEC 61000-4-6CS0.15-80MHz10 V rms3
IEC 61000-4-8PFMFEnclosure10 A/m3
IEC 61000-4-11DIPAC Power Port-A
CERTIFICATIONSTANDARD
ShockMIL-STD-810F Method 516.5
DropMIL-STD-810F Method 516.5
VibrationMIL-STD-810F Method 514.5 C-1 & C-2
RoHSYes
MTBF72.23 years
Warranty5 years

Drawing

All
Model NamePart NumberRJ45 PortsSFP slotsPoE12~57V PoE booster
IJG70011P1IJG70010001G201Yes
TypeModel namePart NumberDescription
Wall MountWall Mount set70100000000052GAluminum wall mount kit
Power SupplySDR-75-2450500752240001GDIN RAIL;AC 88~264V to 24VDC 3.2A;75W
Power SupplySDR-240-4850502401480001GDIN RAIL;AC 88~264V to 48V~55VDC 5A; 240W
Power SupplySDR-480-4850504801480001GDIN RAIL;AC 88~264V to 48V~55VDC 5A; 480W

Datasheet

VersionNameTimeSizeDownload
v0.3Datasheet EN2020-01-06170.56 KB
v0.2Datasheet EN2019-12-06142.77 KB

Hardware Installation Guide

VersionNameTimeSizeDownload
v1.0IJG7001 Hardware Installation Guide2019-12-063.39 MB

Test reports

VersionNameTimeSizeDownload
v1.0IJG7001 Certifications CB_IEC60950-12019-12-062.14 MB
v1.0IJG7001 Certifications CB_IEC62368-12019-12-062.12 MB
v1.0IJG7001 Certifications CE LVD2019-12-062.16 MB
v1.0IJG7001 Certifications CE_FCC2019-12-066.55 MB
v1.0IJG7001 Certifications UL2019-12-062.16 MB