New
SE5201
SE5201
SE5201
SE5201

SE5201


Compact Industrial Field-Mount Serial Device Server

  • 1 x software-selectable RS-232/485/422 port
  • 1 x 10/100Mbps RJ45 Fast Ethernet port
  • Supports TCP server/client, UDP, Virtual COM and Tunneling modes
  • Configuration via Web Server page, Serial Console, Telnet Console, and Windows Utility
  • Upgradable firmware via Ethernet from a remote-PC
  • Rugged metal casing; Industrial EMC protection
  • Redundant dual DC power inputs for non-stop operation
  • Optional DIN-Rail mounting

Despite Ethernet having become the new backbone standard of Industrial Automation, Serial devices still remain highly relevant today, with numerous devices installed on sites worldwide. So with ATOP’s SE5201 Series, you can transform any serial device into an Ethernet-capable one, allowing you to control and monitor your legacy serial devices via your LAN or WAN – or even over the internet.

With such connectivity, the amount of time required to configure or troubleshoot a serial device located on a factory floor or in a remote location is eliminated. And with such Ethernet-based connectivity, serial devices can be integrated into modern practices such as Industry 4.0 and IIoT, allowing you to extend their lifetime and avoid wholesale device upgrades in the near future.

Featuring 1 x software-selectable Serial Port and 1 x RJ45 Port, the SE5201 Series is a simple-to-install device, with easy configurations options such as Telnet, Web browser, Serial Console, or other Windows utilities. And using the VirtualCOM software, Windows-based applications can access serial devices by mapping the virtual com ports to the SE5201 serial server series.

Encased in a rugged metal housing offering high EMC protection, the SE5201 Series is ideal for industrial and manufacturing automation applications, such as PLCs, HMIs, Barcode Scanners, Data Terminals, Electronic Kanbans, Shop Floor Control Systems, and Pick-to-Light Systems.

Network Interface
SpeedIEEE 802.3 10BaseT
IEEE 802.3u 100BaseT(X)
Auto-negotiationPresent
Auto MDI/MDI-XPresent
Connector portsRJ45 x 1
Serial Interface
Connector9-Pin D-Sub9 connector(Male, -DB version) or 5-Pin Terminal block (-TB version)
ModeRS-232/422/485 Software selectable
Ports1
Baud Rate1200~230,400 bps (RS-485 4-wire allows up to 921,600 bps)
ParityNone, Odd, Even, Space, Mark
Data Bits7, 8 software selectable
Stop Bits1, 2 software selectable
Flow ControlNone, Xon/Xoff, RTS/CTS (RS-232 only)
Software
ProtocolsTCP, IPv4, UDP, DHCP Client, HTTP, HTTPS, Telnet, ARP, SNMPv1,v2c,v3
ConfigurationAtop Management Utility, Web UI, Telnet, CLI
VirtualCOMWindows/Linux redirection software
Link Modes - TCP ClientSingle destination or VirtualCOM
Link Modes - TCP Server4 Connections; VirtualCOM or reverse Telnet
Link Modes - UDPUp to 4 Ranges IP
PowerValue
Input Voltage3-Pin 5.08mm Lockable Terminal Block: 9-30VDC; DC Jack 5VDC
Power ConsumptionApproximately 1.50 W (Max)
Power RedundancyYes
Connector3-Pin 5.08mm Lockable Terminal Block and
DC Jack (5VDC)
Reverse Polarity ProtectionYes
Physical CharacteristicsValue
Dimension (W x H x D)65mm x 78mm x 28mm (without wall-mount part)
SE5201-TB: 88.5 x 78.3 x 27.8mm (with wall-mount part)
SE5201-DB: 88.5 x 84 x 27.8mm (with wall-mount part and DB9 connector)
Weight185g
InstallationWall mount, DIN-Rail (optional)
Reset ButtonYes
Environmental Limits
Operating Temperature-40°C ~ 70°C (-40°F ~ 158°F)
Storage Temperature-40°C~85°C (-40°F~185°F)
Ambient Relative Humidity5%~95%, (Non-condensing)
CertificationStandard
SafetyEN60950
EMCFCC Part 15, Subpart B, Class A, EN 55032, EN61000-6-4, EN 61000-3-2, EN 61000-3-3, EN 55024, EN61000-6-2
RoHS 2Yes
REACHYes
StandardItemTest pointValueLevel
IEC 61000-4-2Electrostatic DischargeContact Discharge±6kV3
IEC 61000-4-2Electrostatic DischargeAir Discharge±8kV3
IEC 61000-4-3Radiated Susceptibility80-1000MHz10(V/m)3
IEC 61000-4-4EFTAC Power Port±2.0kV3
IEC 61000-4-4EFTDC Power Port±1.0kV3
IEC 61000-4-4EFTSignal Port±1.0kV3
IEC 61000-4-5SurgeAC Power PortLine-to Line±1.0kV3
IEC 61000-4-5SurgeDC Power PortLine-to Earth±2.0kV3
IEC 61000-4-5SurgeSignal PortLine-to Earth±2.0kV3
IEC 61000-4-6Conducted Susceptibility0.15-80MHz10 Vrms3
IEC 61000-4-8PFMFEnclosure10A/m3
IEC 61000-4-11DIPAC Power Port1. >95%,Reduction,0.5period
2. 30%, Reduction,25 period
3. >95%,Reduction,250 period
-
CertificationStandard
ShockMIL-STD-810F Method 516.5
DropMIL-STD-810F Method 516.5
VibrationMIL-STD-810F Method 514.5 C-1 & C-2
Warranty5 Years
MTBF25.29 years according to MIL-HDBK-217F, 25 degrees C
ProtectionIEC/EN60529 - IP30
MODEL NAMEPART NUMBERDESCRIPTION
SE5201-DB1P1SE520100001GIndustrial Serial Device Server, 10/100BASE-T(X), RS232/422/485 DB9
SE5201-TB1P1SE520100002GIndustrial Serial Device Server, 10/100BASE-T(X), RS232/422/485 TB5
MODEL NAMEPART NUMBERDESCRIPTION
UN315-1212 (US-Y)50500151120003GY-Type power adapter, 100~240VAC input, 1.25A @ 12VDC output, US plug, LV6
UNE315-1212 (EU-Y)50500151120013GY-Type power adapter, 100~240VAC input, 1.25A @ 12VDC output, EU plug, LV6
UV305-0510(US-DC)50500051500003GDC jack (3.5/1.35/7.5 mm) power adapter, 100~240VAC input, 1.0A @ 5 VDC output, US plug, LV6
UVE305-0510 (EU-DC)50500051500013GDC jack (3.5/1.35/7.5 mm) power adapter, 100~240VAC input, 1.0A @ 5 VDC output, EU plug, LV6
UVE305-0510(UK-DC)50500051500023GDC jack (3.5/1.35/7.5 mm) power adapter, 100~240VAC input,
1.0A @ 5 VDC output, UK plug, LV6
ADP-DB9(F)-TB559906231GFemale DB9 to Female 3.81mm TB5 Converter
DK-2530200000000022GPlastic DIN Rail Kit

Utility

VersionNameTimeSizeDownload
v5.20Management Utility for Windows2016-10-2816.21 MB

Firmware

VersionNameTimeSizeDownload
v1.03SE52XX Firmware2018-10-300 B

Datasheet

VersionNameTimeSizeDownload
v0.6Datasheet EN2019-01-14213.79 KB
v0.5Datasheet EN2018-10-30213.93 KB
v0.4Datasheet EN2018-09-11211.78 KB

Manual

VersionNameTimeSizeDownload
v1.1SE52XX User Manual2019-06-032.51 MB

Hardware Installation Guide

VersionNameTimeSizeDownload
v1.1SE5201-SE5201C Series Hardware Installation Guide2019-01-147.16 MB