SE5202 Series
SE5202 Series
SE5202 Series
SE5202 Series

SE5202 Series

Compact 2-Port Industrial Serial Device Server, Field-Mount

  • 2 x software-selectable RS-232/485/422 port
  • 1 x 10/100Mbps RJ45 Fast Ethernet port or 100Mbps SFP Slot
  • Supports TCP server/client, UDP, Virtual COM and Tunneling modes
  • Configuration via Web Server page, Telnet Console, and Windows Utility
  • Integrated SNMPv1/v2c/v3, HTTPS, Telnet and SSH configuration
  • Upgradable firmware via Ethernet from a remote-PC
  • Rugged metal casing; industrial EMC protection
  • Redundant dual DC power inputs for non-stop operation
  • Optional DIN-Rail mounting

Despite Ethernet having become the new backbone standard of Industrial Automation, Serial devices still remain highly relevant today, with numerous devices installed on sites worldwide. So with ATOP’s SE5202 Series, you can transform any serial device into an Ethernet-capable one, allowing you to control and monitor your legacy serial devices via your LAN or WAN – or even over the internet.

With such connectivity, the amount of time required to configure or troubleshoot a serial device located on a factory floor or in a remote location is eliminated. And with such Ethernet-based connectivity, serial devices can be integrated into modern practices such as Industry 4.0 and IIoT, allowing you to extend their lifetime and avoid wholesale device upgrades in the near future.

Featuring 2 x software-selectable Serial Port and 1 x RJ45 Port or SFP Slot, the SE5202 Series is a simple-to-install device, with easy configurations options such as Telnet, Web browser, or other Windows utilities. And using the VirtualCOM software, Windows-based applications can access serial devices by mapping the virtual com ports to the SE5202 serial server series.

Encased in a rugged metal housing offering high EMC protection, the SE5202 Series is ideal for industrial and manufacturing automation applications, such as PLCs, HMIs, Barcode Scanners, Data Terminals, Electronic Kanbans, Shop Floor Control Systems, and Pick-to-Light Systems.

Network Interface
Ethernet Port1x 10/100BASE-T(X) RJ-45 or 1x100BASE-FX SFP Slot
ComplianceIEEE 802.3 for 10BASE-T
IEEE 802.3u for 100BASE-T(X) and 100BASE-FX
Serial Interface
Connector9-Pin D-Sub9 connector(Male, -DB version) or 5-Pin Terminal block (-TB version)
Mode1x RS-232(Full-function DB9)/RS-485(2 and 4 wire)/RS-422, software selectable
1x RS-232/RS-485(2 and 4 wire)/RS-422, software selectable
Baud Rate1200~230,400 bps
ParityNone, Odd, Even, Space, Mark
Data Bits7, 8
Stop Bits1, 2
Flow ControlNone, Xon/Xoff, RTS/CTS (RS-232 only)
Connector3-Pin 5.08mm Lockable Terminal Block and DC Jack for redundancy
Input Voltage
Power Consumption
Power Redundancy
3-Pin 5.08mm Terminal Block: 9-30VDC; DC Lockable Jack 5VDC
Isolation3kV (-Sis versions only)
Reverse Polarity ProtectionYes
Physical CharacteristicsValue
Dimension (W x H x D)75 mm x 85 mm x 28 mm (without wall-mount part)
SE5202-TB/SE5202-Sis: 74.5 x 108.2 x27.5mm (with wall-mount part)
SE5202-DB: 80.3 x 108.2 x27.5mm (with wall-mount part and DB9 connector)
SE5202-SFP-TB: 76.6 x 108.2 x 27.5mm (with wall-mount and SFP)
SE5202-SFP-DB: 81.4 x 108.2 x 27.5mm (with wall-mount SFP and DB9)
InstallationWall-Mount or DIN-Rail (optional kit)
Reset ButtonYes
Environmental Limits
Operating Temperature-40°C ~ 70°C (-4°F ~ 158°F)
Storage Temperature-40°C ~ 85°C (-40°F ~ 185°F)
Ambient Relative Humidity5 ~ 95% RH, (non-condensing)
ProtocolsTCP, IPv4, UDP, DHCP Client, HTTP, HTTPS, Telnet, ARP, SNMPv1/v2cv3
ConfigurationAtop Management Utility, Web UI, Telnet, CLI
VirtualCOMWindows/Linux redirection software
Link Modes - TCP ClientSingle destination or VirtualCOM
Link Modes - TCP Server4 Connections; VirtualCOM or reverse Telnet
Link Modes - UDPUp to 4 Ranges IP
EMCFCC Part 15, Subpart B, Class A
EN 55032, EN61000-6-4
EN 61000-3-2
EN 61000-3-3
EN 55024, EN61000-6-2
StandardItemTest pointValueLevel
IEC 61000-4-2ESDContact Discharge
Air Discharge
IEC 61000-4-3RS80-1000MHz10(V/m)3
IEC 61000-4-4EFTAC Power Port
DC Power Port
Signal Port
IEC 61000-4-5SurgeAC Power Port
AC Power Port
Signal Port
Line-to Line±1.0KV
Line-to Earth±2.0KV
Line-to Earth±1.0KV
IEC 61000-4-6CS0.15-80MHz10 Vrms3
IEC 61000-4-8PFMFEnclosure30A/m3
IEC 61000-4-11DIPAC Power Port--
ShockMIL-STD-810F Method 516.5
DropMIL-STD-810F Method 516.5
VibrationMIL-STD-810F Method 514.5 C-1 & C-2
Warranty5 Years


SE5202-DB1P1SE520200001G1x 10/100 RJ452x D-Sub 9-
SE5202-TB1P1SE520200002G1x 10/100 RJ452x 5-pinTerminal Block-
SE5202-Sis1P1SE520200003G1x 10/100 RJ452x 5-pinTerminal Block3kV Serial Isolation
SE5202-SFP-DB1P1SE520200004G1x 100Mbps SFP2x D-Sub 9-
SE5202-SFP-TB1P1SE520200005G1x 100Mbps SFP2x 5-pinTerminal Block-
UN315-1212 (US-Y)50500151120003GY-Type power adapter, 100~240VAC input, 1.25A @12VDC output, US plug
UNE315-1212 (EU-Y)50500151120013GY-Type power adapter, 100~240VAC input, 1.25A @12VDC output, EU plug
2AAU005B-EU50500051500014GDC jack (5.0/2.1/9.5 mm) with Lock power adapter, 100~240VAC input, 1.0A @ 5 VDC output, EU plug, LV VI
2AAU005B-US50500051500004GDC jack (5.0/2.1/9.5 mm) with Lock power adapter, 100~240VAC input, 1.0A @ 5 VDC output, US plug, LV VI
ADP-DB9(F)-TB559906231GFemale DB9 to Female 3.81mm TB5 Converter
ADP-DB9(M)-DB9(F)59901411GSE_MB52XX DB9 Pin assignment to SE_MB50XX DB9 Pin assignment
DK-2530200000000022GPlastic DIN Rail Kit
LM38-A3S-TI-N50708051GSFP Transceiver, 155Mbps, 1310nmLED, Multi-mode, 2km, 3.3V, -40~85C


v1.0Linux_Driver_x642021-03-29210.16 KB
v5.60Management Utility for Windows2021-01-1823.65 MB
v5.20Management Utility for Windows2019-07-1816.21 MB


v1.14SE52XX Firmware2020-11-179.98 MB
v1.13SE52XX Firmware2020-08-259.98 MB
v1.10SE52XX Firmware2020-05-069.71 MB
v1.09SE52XX Firmware2020-01-079.71 MB
v1.08SE52XX Firmware2019-08-230 B
v1.08SE52XX Firmware2019-07-180 B


v1.8Datasheet EN2020-12-01211.56 KB
v1.7Datasheet EN2020-09-26209.82 KB
v1.6Datasheet EN2020-06-15209.84 KB
v1.5Datasheet EN2020-05-27209.71 KB
v1.4Datasheet EN2020-05-11208.06 KB
v1.3Datasheet EN2019-12-27209.59 KB
v1.2Datasheet EN2019-12-11209.44 KB
v1.1Datasheet EN2019-07-18183.68 KB


v1.4SE52XX User Manual2021-03-191.96 MB
v1.2SE52XX User Manual2019-08-222.65 MB
v1.1SE52XX User Manual2019-07-182.51 MB

Hardware Installation Guide

v2.0SE5202-MB5202 Series Hardware Installation Guide2019-07-183.14 MB

Test reports

v1.00SE5202-MB5202 CE/FCC/LVD2019-10-1811.6 MB