IJG7001

Industrial 12V PoE, PoE+ Injector

  • Supports 802.3af (PoE), 802.3at (PoE+)
  • Up to 30W PoE power available
  • Dedicated 12VDC power input
  • Supports Mode A and Mode B, DIP-Switch selectable
  • 2x 10/100/1000 BASE-T(X) ports (data in, data + PoE out)
  • IP30 aluminum with DIP-Rail / Wall mount (optional)
  • Operating range of -40°C to 75°C
  • EN 62368-1 and IEC 62368-1 certified
  • Strong EMC protection, up to Level 4
IJG7001
IJG7001
IJG7001

Multi-Protocol support
Power over Ethernet is a convenient tool to simplify industrial network and IoT setups, and is now widely utilized in end devices such as wireless APs or IP cameras. The IJG7001 PoE injector supports IEEE 802.3at (PoE+) as well as the legacy IEEE 802.3af (PoE), so you can provide PoE power to virtually any device.

Mode A and Mode B selection
IJG7001 supports both Mode A and Mode B for 802.3af/at. Say goodbye to the hassle of finding the model type you need, and simply adjust IJG7001’s DIP-Switch setting according to your device.

Durable hardware
With strong EMC protection and a wide operating range, IJG7001 can be installed on machine-side to reduce the cost of power supply equipment and thus the overall cost of ownership.

Environmental LimitsValue
Operating Temperature-40°C to +75°C (-40°F to +167°F)
Storage Temperature-40°C to +85°C (-40°F to +185°F)
Ambient Relative Humidity5% to 95% (Non-condensing test @55°C)
Physical CharacteristicsValue
HousingIP30 metal housing
Dimension (W x H x D)32 x 110 x 90 mm
Weight340 g
InstallationDIN-Rail, Wall mount (optional kit)
LEDValue
IndicatorsP1, P2, PoE
PowerValue
PoE Voltage BoosterYes (Max support 30W)
Input Voltage12 (power limitations)
Input CurrentMax 3.6A @12VDC
Max. Power Consumption30W
EthernetStandard-
ComplianceIEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3af for Power-over-Ethernet (PoE - max 15.4W)
IEEE 802.3at for Power-over-Ethernet (PoE+ - max 30.0W)
PoE modesMode A/ Mode B DIP-Switch selectable
Mode A: PoE power through data pins (1,2,3,6)
Mode B: PoE power through spare pins (4,5,7,8)
RJ 45 Transmission Rate10/100/1000 Mbps
Auto MDI/MDI-XYes
CERTIFICATIONSTANDARD
ShockMIL-STD-810F Method 516.5
DropMIL-STD-810F Method 516.5
VibrationMIL-STD-810F Method 514.5 C-1 & C-2
RoHSYes
MTBF72.23 years
Warranty5 years
STANDARDITEMTEST POINTVALUELEVEL
IEC 61000-4-2ESDContact Discharge
Air Discharge
±6kV
±8kV
3
3
IEC 61000-4-3RS80-1000MHz
1. 4-2.0GHz
2. 0-2.7GHz
10(V/m)
3(V/m)
10(V/m)
3
3
3
IEC 61000-4-4EFTDC Power Port
Signal Port
±4.0KV
±2.0KV
4
4
IEC 61000-4-5SurgeDC Power Port
DC Power Port
Signal Port
Line-to Line±2.0kV
Line-to Earth±4.0kV
Line-to Earth±3.0kV
4
4
3
IEC 61000-4-6CS0.15-80MHz10 V rms3
IEC 61000-4-8PFMFEnclosure10 A/m3
IEC 61000-4-11DIPAC Power Port-A
CERTIFICATIONSTANDARD
SafetyEN60950-1, EN62368-1
EMCFCC Part 15, Subpart B, Class A
EN 55032:2015 +AC:2016 Class A, EN 61000-3-2: 2014, Class A, EN 61000-3-3: 2013,
EN 61000-6-4: 2007+ A1: 2001 EN 55024: 2010+ A1:2015, EN 61000-6-2:2005+ AC : 2005

DIMENSIONS & LAYOUT

TypeModel namePart NumberDescription
Wall MountWall Mount set70100000000052GAluminum wall mount kit
Model NamePart NumberRJ45 PortsSFP slotsPoE12~57V PoE booster
IJG70011P1IJG70010001G201Yes

Datasheet

Version Name Time Size Download
v1.0 Datasheet EN 2022-03-15 231.78 KB
v0.3 Datasheet EN 2020-01-06 170.56 KB
v0.2 Datasheet EN 2019-12-06 142.77 KB

Hardware Installation Guide

Version Name Time Size Download
v1.1 IJG7001 Hardware Installation Guide 2022-03-15 5.33 MB
v1.0 IJG7001 Hardware Installation Guide 2019-12-06 3.39 MB

Test reports

Version Name Time Size Download
IJG7001 Declarations of Conformity 2023-03-15 297.4 KB
v1.0 IJG7001 Certifications CB_IEC60950-1 2019-12-06 2.14 MB
v1.0 IJG7001 Certifications CB_IEC62368-1 2019-12-06 2.12 MB
v1.0 IJG7001 Certifications CE LVD 2019-12-06 2.16 MB
v1.0 IJG7001 Certifications CE_FCC 2019-12-06 6.55 MB
v1.0 IJG7001 Certifications UL 2019-12-06 2.16 MB

I have read and agree to the Privacy Policy (art.13 and 14 of the GDPR - EU Regulation 2016/679).