SE5908A SDK Series

IEC61850-3 certified Industrial Embedded
Computer, with up to 16 Serial Ports

  • IEC 61850-3 certified for easy setup in IEC 61850-3 substations
  • Ideal for IoT and IIoT applications.
  • Wide -40°C to +80°C temperature range; Industrial EMC protection
  • 6 x 10/100Mbps RJ45 ports or 6 x 100Mbps SFP Slots
  • Up to 16 x RS-232/422/485 ports – selectable baud rate up to 921.6 Kbps
  • 3 kV optional isolation on the serial ports
  • Internal SD Card slot
  • ATOP customized Linux SDK environment with reliable APIs
  • Redundant Power Input for fault protection: either 24~48 VDC or High-Voltage AC/DC (100~240VAC or 100~370VDC)
  • Rugged metal housing in 1U Rack-mount (rack-mount kit included)
New
SE5908A SDK Series
SE5908A SDK Series

Providing connectivity for the Internet of Things
ATOP’s Industrial Embedded Computer is your ideal flexible Gateway to the Internet of Things, specifically tailored for advanced Power Substation applications. It provides Serial, Ethernet connectivity and interfaces that can unlock your potential. Based on your specific application, it allowing almost any serial device to be connected, providing and retrieving the data you need to and from the cloud, no matter what provider you’re using.

 

Programmability
Write your customized application in C language and Run it on its powerful Industrial low-power 1GHz ARM Cortex A8 TI Sitara AM3352 CPU. Make flexible use of your peripherals, no matter storage, Serial, or USB are needed.
SE5908A is available as a SDK/BSP. The SDK development environment reserves the maximum flexibility. Bottom to top editable software architecture allowed easily to customize or add the IoT applications for different using scenarios. Included Linux kernel source extend the capability of the kernel layer. Changeable WEB pages allowed to easily customize proprietary style. With the SE5908A SDK, it will extend your possibility while building your IoT applications.

 

Rugged and flexible for advanced developments
SE5908A embeds high EMC protection, wide temperature operation, programming and installation flexibility in one device. The IEC61850-3 certified hardware makes it the most advanced Computing option, while the dual power supply provides additional redundancy in case of power failure. High-Voltage option makes the device suitable for High-Voltage AC or DC inputs (100~240 VAC or 100~370VDC) that are common in substation environments., without additional cabling and power supply.

 

SE5908A (SDK) block diagram

 

Application
The IoT (Internet of Things) or IIoT (Industrial Internet of Things) is a trending topic these days. It’s all about bringing devices, sensors, actuators, data and commands to the cloud, with the ultimate goal to improve the quality of life, the services Smart Cities can offer, saving energy or saving money. This requires two things: to vehiculate the collected data to the cloud in a format that can be recognized and processed and to process, compute and analyze all this amount of data in real time.
It is not a concept far from reality. Imagine you’d like to bridge a Modbus Sensor to the cloud. And you’d like to have the application running on the cloud to be able to process multiple sensors’ data, and to trigger some event in some specific stations along the network. You may also have the need to override the cloud control and manage the application locally. Any application has its story.

Here at ATOP, we understand these different needs and we are providing you different working models, based on what your needs are.

 

Use the Standard SDK, programmable embedded computer if:

  • You are familiar with Linux OS
  • You have ANSI C programming skills
  • Your application is strictly time/ performance sensitive
  • Your application has very critical exception handling requirements

 


Our SDK products provide:

  • Ported, proven and tested peripherals
    (such as I/Os, Ethernet, Serial, Relays) and integrated drivers
  • ATOP customized Linux Kernel and network protocols
  • Ported, debugged and proven third party application
  •  Utilities and APIs to control the hardware in an easy and effective way
  • Opened software architecture to create your own system image
  • Linux source code to extend the kernel capability
  • Modifiable WEB contents to customize proprietary WEB style
  • Example of source code

 

 

 

Hardware Specifications 
CPUTexas Instruments Sitara ARM Cortex A8 AM3352 1000MHz
Flash32 MB NOR Flash (customizable upon request up to 128 MB)
RAM256 MB DDR3 (customizable upon request up to 1 GB)
EEPROM24LC64
WatchdogADM706
Real Time Clock (RTC)Yes - with external chip
BuzzerYes
Console portYes - RJ45 Serial Console
Reset ButtonYes
Network Interface 
StandardsIEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseF(X)
Ethernet Ports6x 10/100 BASE-T(X) RJ45 or
6x 100 BASE-F(X) SFP Slots (SFP version)
Ethernet SwitchEmbedded 8-Ports Fast-Ethernet Switch (configurable). Each port can work
as single Subnet or as Switch
Serial Interface 
ConnectorDB version: D-Sub9 (DB9) connector
TB and SiS version: 5-Pin Terminal Block (5.08mm)
PortsSE5908A: 8-ports (RS-232 (supports only 5-pin mode)/RS-422/RS-485)
SE5916A: 16-ports (RS-232 (supports only 5-pin mode)/RS-422/RS-485)
Serial Console1x Serial Console port (RJ45)
Serial Port Isolation3 kV (SiS version only)
Pull-high / Pull-low /Term. resistorsSoftware Selectable
Baud Rate50 ~ 921,600bps
Data Bits5, 6, 7, 8
Stop Bits1, 2
Flow ControlNone, Xon/Xoff, RTS/CTS (RS-232 only)
Other interfaces 
USB portsNo
SD CardSD card slot (internal)
Relay Output1x 1A@30VDC (Normal open)
Software
BootloaderU-boot 2014.07
Linux kernelLinux 3.14.26
Linux toolchainLinux 32 bits toolchain gcc (C/C++ PC cross compiler), glibc
Linux sample codeRS232, RS485, RTC, watchdog, LED, Buzzer, Button, network socket
Power
Rated Aupply VoltageRedundant 24-48 VDC or

Redundant 100-240 VAC/ 100-370 VDC (HV Series)
Input Voltage RangeRedundant 19.2-52.8 VDC or

Redundant 85-264 VAC/ 100-370 VDC (HV Series)
Input Current0.73 A @ 24 VDC
0.35 A @ 100 VAC
0.20 A @ 100 VDC
Power ConsumptionApproximately 20 W
Connector10-Pin Terminal Block
Power RedundancyYes
Reverse Polarity ProtectionYes
Environmental
Operating Temperature-40°C to +80°C (-40°F to +176°F)
Storage Temperature-40°C~85°C (-40°F~185°F)
Ambient Relative Humidity5%~95%, 55° (Non-condensing)
Mechanical
HousingIP30 protection, SPCC metal housing
Dimensions(W x H x D)440.6 x 44 x 309 mm (1U Rack-mount)
Installation19’’ Rack-Mount (Kit included)
Weight4,000g
Reset ButtonYes
CertificationStandard
SafetyEN61010-1, EN 61010-2-201
EMCFCC Part 15, Subpart B, Class A, EN 55032, Class A, EN 61000-6-2, EN 61000-3-2, EN 61000-3-3,

EN 55024, EN 61000-6-4, IEC 61850-3 / IEEE 1613
RoHS IIYes
StandardItemTestValueLevel
IEC 61000-4-2ESDContact Discharge±8kV4
IEC 61000-4-2ESDAir Discharge±15kV4
IEC 61000-4-3RSRadiated (enclosure)20 V/m3
IEC 61000-4-4EFTAC Power Port±4.0kV4
IEC 61000-4-4EFTDC Power Port±4.0kV4
IEC 61000-4-4EFTSignal Port±4.0KV4
IEC 61000-4-5SurgeAC Power Port (L-2-L)Line-to Line±2.0KV4
IEC 61000-4-5SurgeAC Power Port (L-2-E)Line-to Earth±4.0KV4
IEC 61000-4-5SurgeDC Power Port (L-2-L)Line-to Line±1.0KV3
IEC 61000-4-5SurgeDC Power Port (L-2-E)Line-to Earth±2.0KV3
IEC 61000-4-5SurgeSignal Port (L-2-E)Line-to Earth±4.0KV4
IEC 61000-4-6CSAC Power Port10 V rms3
IEC 61000-4-6CSDC Power Port10 V rms3
IEC 61000-4-6CSSignal Port10 V rms3
IEC 61000-4-8PFMFEnclosure100 A/m
1000 A/m (1sec.)
5
6
IEC 61000-4-11DIPAC Power Port30% reduction (Voltage Dips), 1 period
60% reduction (Voltage Dips), 50 period
100%, reduction (Voltage interruptions), 5 period
100% reduction (Voltage interruptions), 50 period
-
CertificationStandard
ShockMIL-STD-810F Method 516.5
Drop (Freefall)MIL-STD-810F Method 516.5
VibrationMIL-STD-810F Method 514.5 C1 & C2
RoHSYes
MTBFSE5908A-6SFP-Sis-HV: 13.01 years; SE5916A-6SFP-Sis: 12.13 years
Warranty5 years
MODEL NAME PART NUMBERDESCRIPTION
SE5908AContact HeadquarterInd. 8 Port Emb. Computer,10/100BASE-T(X) RJ45, DB9
SE5908A-6SFPContact HeadquarterInd. 8 Port Emb. Computer, 100BASE-FX SFP slot, DB9
SE5908A-6SFP-HVContact HeadquarterInd. 8 Port Emb. Computer, 100BASE-FX SFP slot, DB9
SE5908A-6SFP-SisContact HeadquarterInd. 8 Port Emb. Computer, 100BASE-FX SFP,Isolated
SE5908A-6SFP-Sis-HVContact HeadquarterInd. 8 Port Emb. Computer, 100BASE-FX SFP,Isolated
SE5908A-6SFP-TBContact HeadquarterInd. 8 Port Emb. Computer, 100BASE-FX SFP slot, TB5
SE5908A-6SFP-TB-HVContact HeadquarterInd. 8 Port Emb. Computer, 100BASE-FX SFP slot, TB5
SE5908A-HVContact HeadquarterInd. 8 Port Emb. Computer,10/100BASE-T(X) RJ45, DB9
SE5908A-SisContact HeadquarterInd. 8 Port Emb. Comp.,10/100BASET(X) RJ45, Isolated
SE5908A-Sis-HVContact HeadquarterInd. 8 Port Emb. Comp.,10/100BASET(X) RJ45, Isolated
SE5908A-TBContact HeadquarterInd. 8 Port Emb. Computer,10/100BASE-T(X) RJ45, TB5
SE5908A-TB-HVContact HeadquarterInd. 8 Port Emb. Computer,10/100BASE-T(X) RJ45, TB5
Please note the following
suffixes to be added to he
chosen model name:
SDK version suffix: (SDK)
MODEL NAME PART NUMBERDESCRIPTION
SDR-75-2450500752240001G75W/3.2A DIN-Rail 24VDC power supply with 88~264VAC / 124~370VDC input
CBL-RJ45(8P)-DB9(F)-90-C50891971G8-pin RJ45-DB9 debug cable, 90cm
ADP-DB9(F)-TB559906231GFemale DB9 to Female 3.81 TB5 Converter
GDC-12059906861G120mm copper woven grounding cable
LM38-A3S-TI-N50708051GSFP Transceiver, 155Mbps, 1310nmLED, Multi-mode, 2km, 3.3V, -40~85C
LS38-A3S-TI-N50709431GSFP Transceiver, 155Mbps, 1310nmFP, Single-mode, 30km, 3.3V, -40~85C

Utility

Version Name Time Size Download
v1.0 Linux_Driver_x64 2021-03-29 210.16 KB

Firmware

Version Name Time Size Download
v2.01 SE5908A Firmware 2021-03-22 10.28 MB

Datasheet

Version Name Time Size Download
v1.1 Datasheet EN 2024-03-21 506.15 KB
v1.0 Datasheet EN 2023-11-06 437.73 KB
v0.7 Datasheet EN 2021-03-22 684.18 KB
v0.4 Datasheet EN 2019-06-05 644.04 KB
v0.3 Datasheet EN 2018-08-24 806.03 KB

Manual

Version Name Time Size Download
v1.2 SE59XX SDK User Manual 2018-05-02 2.25 MB
v1.1 SE59XX SDK User Manual 2018-02-05 2.41 MB
v1.4 SE59XX Node-RED User Manual 2019-04-22 5.72 MB
v1.2 SE59XX Node-RED User Manual 2018-08-24 5.59 MB
v0.1 AWS Getting started guide 2021-08-19 907.53 KB
v0.5 SE59XX SDK User Manual 2021-04-13 2.55 MB

Hardware Installation Guide

Version Name Time Size Download
v1.4 SE5908A SDK Hardware Installation Guide 2024-01-30 3.37 MB
v1.3 SE5916A/MB5916A/PG5916A Hardware Installation Guide 2017-01-23 4.39 MB

Test reports

Version Name Time Size Download
v1.0 SE-MB-PG5900A-08A-16A Certifications CE EN55032+EN55024 2019-11-20 1.71 MB
v1.0 SE-MB-PG5900A-08A-16A Certifications CE EN61000-6-4+EN61000-6-2 2019-11-20 1.46 MB
v1.0 SE-MB-PG5900A-08A-16A Certifications FCC 2019-11-20 1.21 MB
v1.0 SE-MB-PG5900A-08A-16A Certifications IEC61850-3 2019-11-20 3.7 MB
v1.0 SE-MB-PG5900A-08A-16A Certifications IEEE 1613 2019-11-20 946.69 KB
v1.0 SE-MB-PG5900A-08A-16A Certifications LVD 2019-11-20 5.32 MB

I have read and agree to the Privacy Policy (art.13 and 14 of the GDPR - EU Regulation 2016/679).