New
EMG8510 Series
EMG8510 Series
EMG8510 Series

EMG8510 Series


10-Port EN 50155 Certified Railway IP67 waterproof Managed Gigabit PoE Switch with 8 x M12 copper ports and 2 x Gigabit SFP slots

  • 8 x 10/100/1000 BASE-T(X) ports, M12 connector and 2 x 1000 SFP slots
  • Up to 8 x 802.3af or 802.3at complaint PoE ports providing maximum 240W PoE power budget
  • EN50155, EN50121-4 and UL 61010-2-201 certified
  • Redundant power input, DC or High Voltage DC
  • Ruggedized IP67 aluminum enclosure
  • Works from -40°C~75°C
  • 2x Relay outputs, 5-pin M12 A-Coding
  • Profinet Conformance Class B compatible
  • Ethernet/IP Compatible8 10/100/1000 BASE-T(X) ports, M12 connector

Atop’s EMG8510 IP67-rated Railway-compliant Ethernet switch is the best solution for providing high-speed Gigabit connectivity in bayside or carriage side Railway applications. Its rugged, aluminum enclosure can effectively protect the Switch core in any environment.

The 8-M12 Connectors Gigabit ports can supply up to 30W of PoE Power (802.3af or 802.3at) to your PoE device providing an overall maximum budget of 240W. This makes EMG8508 the ideal solution for on-board or off-board surveillance by simplifying the wiring where it’s difficult, risky and expensive to introduce new elements.

Two Gigabit SFP slots provide to EMG8510 Series the capability to be connected with Fiber-Optics to the backbone without the need of Copper Ethernet repeaters and without any risk of signal degradation.

The embedded redundant-power supply input provides a reliable and failure-proof safety mechanism to minimize down-times. EMG8510 comes in either redundant Low-Voltage DC power input (12~57 VDC, 47~57 VDC for PoE models) or in redundant High Voltage DC power input (50~145 VDC). Each power module, including a Relay-output alarm, uses a S-coding M12 connector that makes EMG8508 ideal and simple for engineers setting up a Fault-Alarm System.

Its IP67 housing protection, combined with a wide operating temperature of -40 to 75°C and wall mounting capacities make it suitable to most Railway applications in harsh environments or industrial field applications.

Switch Properties 
Priority Queues8
VLAN Table4,096
MAC-Based VLAN512
VLAN ID RangeVID 1 to 4,094
Trunk Group4
Static IGMP Groups128
Dynamic IGMP Groups256
MAC Table Size16k
Packet Buffer Size1.5 MB
Jumbo Frame9216 Byte
ETHERNET
StandardsIEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3z for 1000BaseX
IEEE 802.3af / 802.3at for Power over Ethernet
IEEE 802.3x for Flow Control, back pressure flow control
IEEE 802.1d-2004 for Spanning Tree Protocol
IEEE 802.1w for Rapid Spanning Tree Protocol
IEEE 802.1s for Multiple Spanning Tree Protocol
IEEE 802.1Q for VLAN Tagging
IEEE 802.1p for Class of Service
IEEE 802.1X for Authentication
IEEE 802.3ad for Port Trunk with LACP
IEEE 802.3az for Energy Efficient Ethernet
ProtocolsIPv4, IPv6, IGMPv1/v2/v3, IGMP Snooping,GARP, GMRP, GVRP, SNMPv1/v2c/
v3, SNMP Inform, ICMP, Telnet, SSH, DHCP Server/Relay/Client, DHCP Option
66/67/82, BootP, RARP, TFTP, NTP Server/Client, SNTP, SMTP, SMTP (Gmail),
RMON, HTTP, HTTPS, Syslog, MRP (Client), LLDP, IEEE 1588 PTP V1/V2, IEEE
1588 Hardware Transparent Clock, 802.1x, EAP, RADIUS, TACACS+, Mirror
port, QoS, ACL, Serial Console, U-Ring, ITU-T G.8032 ERPS Ring, STP, RSTP,
MSTP, Compatible Ring
Automation ProfilesProfinet CC-B compatible, Ethernet/IP, Modbus/TCP (dedicated registers)
SNMP MIBMIB II, IF-MIB, SNMPv2 MIB, BRIDGE-MIB, RMON MIB Group 1,2,3,9, RFC
RFC 1157, RFC 1213, RFC 1215, RFC 1493, RFC 1643, RFC 1757, RFC 2011,
RFC 2012, RFC 2013, RFC 2233, RFC 2571, RFC 2742, RFC 2819, RFC 2863,
RFC 3411, RFC 3412, RFC 3413, RFC 3414, RFC 3415, RFC 2674
Power 
Input Voltage50~145 VDC for High voltage product
12~57 VDC for Non-PoE models
45~57 VDC for 802.3af mode /51~57 VDC for 802.3at mode
Input Voltage50 – 145 VDC, 0.27A max. , 13.5W (For High voltage Models)
12 – 57 VAC, 1.19A max. , 14.28W (For Non-PoE Models)
Input Current (with PoE, full loading)45 – 57 VDC, 3.08A max. , 138.6W (PoE 802.3af Mode, 8-ports)
51 – 57 VDC, 5.03A max. , 256.53W (PoE 802.3at Mode. 8-ports)
Input Current (with PoE, full loading)Max 12.6 W @9 VDC (without PoE)
Max 130.5 W @45VDC (802.3af, with 15.4W PoE per port for 8 ports)
Max 255 W @51VDC (802.3at, with 30W PoE per port for 8 ports)
Power Input5-Pin 5.08mm Lockable Terminal Block
Reverse Polarity ProtectionYes
InterfacesValue
Ethernet Ports8 x 10/100/1000BASE-T(X) auto negotiation speed - M12 connector
Fiber Optics Ports2 x 1000Base-X SFP slots
ConsoleRS232 (A-coding M12 connector)
LED IndicatorsPWR1, PWR2, Alarm, Ethernet Act/Link, SFP Link, PoE, Ring
Relay Output2 relay outputs with current carrying capacity of 1A @ 24 VDC (through A-coding M12 connector)
Physical Characteristics 
HousingIP67 protection according to EN 60529
Dimension (W x H x D)216 x 232 x 72 mm
Weight2kg
InstallationWall-mount (Optional Din-Rail Kit)
Environmental LimitsValue
Operating Temperature-40°C~75°C (-40°F~167°F)
Storage Temperature-40°C~85°C (-40°F~185°F)
Ambient Relative Humidity5%~95%, 55°C (Non-condensing)
CertificationStandard
SafetyEN 60950-1:2006, UL/IEC(CB) 61010-2-201
EMCFCC Part 15, Subpart B, Class A
EN 55032, EN 55024, EN 61000-3-3, EN 61000-6-2, EN 61000-6-4,
RoHS 2Yes
Rail TrafficEN50155, EN50121-4
StandardItemTestValueLevel
IEC 61000-4-2ESDContact Discharge±8kV4
IEC 61000-4-2ESDAir Discharge±15kV4
IEC 61000-4-3RS80-1000MHz10 V/m3
IEC 61000-4-3RS800-1000MHz20 V/m3
IEC 61000-4-3RS1.4-2.1GHz10 V/m3
IEC 61000-4-3RS2.0-2.5GHz5 V/m3
IEC 61000-4-4EFTDC Power Port±4.0KV3
IEC 61000-4-4EFTSignal Port±2.0KV3
IEC 61000-4-5SurgeDC Power Port (L-2-L)±1.0KV3
IEC 61000-4-5SurgeDC Power Port (L-2-E)±2.0KV3
IEC 61000-4-5SurgeSignal Port (L-2-L)±1.0KV3
IEC 61000-4-5SurgeSignal Port (L-2-E)±2.0KV3
IEC 61000-4-6CS0.15-80MHz10 V rms3
IEC 61000-4-8PFMFEnclosureDC 300A/m3
CertificationStandard
ShockMIL-STD-810G Method 516.5
DropMIL-STD-810F Method 516.5
VibrationMIL-STD-810F Method 514.5 C-1 & C-2
Warranty5 Years
MTBF18.53 years (mean avg. per model; MIL-HDBK-217F-based prediction)
MODEL NAMEPART NUMBERM12 PORTSSFP SLOTSPoE PORTS
EMG85101P1EMG85100001G82-
EMG8510-4PoE-2SFP1P1EMG85100002G824
EMG8510-8PoE-2SFP1P1EMG85100003G828
EMG8510-2SFP-HV1P1EMG85100004G82-
MODEL NAMEPART NUMBERDESCRIPTION
DIN-Rail Kit70100000000062GDIN Rail accessories with screw
VESA Kit70100000000063GVESA accessories with screw
SDR-75-2450500752240001GDIN RAIL POWER SUPPLY / T;AC 88~264V to 24VDC 3.2A;75W
SDR-240-4850502401480001GDIN RAIL POWER SUPPLY / T;AC 100~240V to 48V DC 5A;240W
SDR-480-4850504801480001GDIN RAIL POWER SUPPLY / T;AC 100~240V to 48V DC 10A;480W
M12 Sealing Cap Plastic3990079GPlastic sealing cap for unoccupied M12 plugs (1560251)
M12 Sealing Cap Metal59908571GMetal sealing cap for unoccupied M12 plugs (1430488)
M12 screw plug Plastic3990078GPlastic Screw Locking for unoccupied M12 sockets (1553129)
M12 screw plug Metal59908561GMetal Screw Locking for unoccupied M12 sockets (1503302)
AFBR-5715ALZ50710361GSFP Transceiver for EMG8510, 1250Mbps, 850nm, Muti-mode, 10km, 3.3V,
-40~85°C with DMI
AFCT-5715ALZ50710351GSFP Transceiver for EMG8510, 1250Mbps, 1310nm, Single-mode, 10km, 3.3V,
-40~85°C with DMI

Utility

VersionNameTimeSizeDownload
v5.20Management Utility for Windows2016-10-2816.21 MB

Firmware

VersionNameTimeSizeDownload
v2.20EHG75XX Firmware2017-12-1413.55 MB

Datasheet

VersionNameTimeSizeDownload
v0.8Datasheet EN2018-07-19571.43 KB
v0.7Datasheet EN2018-04-19571.12 KB

Manual

VersionNameTimeSizeDownload
v1.4EHG75XX/ EMG85XX/ RHG75XX/ RHG95XX/ EHG95XX User Manual2017-09-285.41 MB

Hardware Installation Guide

VersionNameTimeSizeDownload
v2.0EMG8508/EMG8510 Hardware Installation Guide2017-09-076.54 MB