SE5201B Series

Low Power Consumption Gateway LTE Cat-1

  • Comprehensive Connectivity
    - LTE Cat 1
    - 2x 100 Base TX RJ 45, 2x LAN
    - 1 RS 232/485 COM Ports
    - 1 DI & 1 DO I/O Interface
  • Reliable & Trustworthy Platform
    - Multi WAN Failover
    - Secure VPN and Firewall Isolation
    - IEC62443-4-2 Cybersecurity Compliance*
  • Quick Deployment & Management
    - ATOP NMS Management
  • Compact and Robust Design
    - Efficient Power Consumption (<100 mW)
    - Dimensions: 136 x 95 x 30 mm
    - Industrial EMC Protection
    - -30°C to +75°C Operation
  • Other Features
    - SD Slot for Configuration and Storage
    - Optional GPS Function
    - Schedulable Power Management
  • High Quality Guaranteed
    - Made in Taiwan with 5 Years Warranty
New
SE5201B Series
SE5201B Series

ATOP SE5201B IoT gateway is a super-low power consumption LTE gateway. In addition to high EMC protection, widetemperature operation, and rugged metal housing, SE5201B series has a configurable power management mechanism to reduce device power consumption. It is suitable for various operations, especially in power-challenged environments.

 


Efficient Power Consumption
SE5201B supports Cellular LTE Cat-1. With extended idle and sleep modes, these standards have lower power consumption than other LTE standards. SE5201B further enhances this efficiency by using less than 100 mW power in sleep mode, allowing easy deployment in power-challenged environments.

 


Expandable SD Storage
SE5201B reserves the flexibility to extend its storage capacity through a built-in SD slot, so you can store more data on the IoT gateway for work efficiency as well.

 


Exceptional Security
Integrating Firewall, Zone forwarding, and VPN functions, ATOP SE5201B allows you to connect your industrial network to the internet without fearing intrusions to your organization data.

 


Endurance of Harsh Environments
ATOP SE5201B is proven to run at its maximum loading in the harshest EMC and climate environments.

 

APPLICATION CASE

 


As a Low Power Consumption IoT Gateway
SE5201B can act as a low power consumption gateway. Through its smart power management mechanism, the device switches to sleep mode or hibernation mode during non-service phases, and can be woken via scheduled
management policies to serve functions when needed. It is especially suited where power supply is limiting, such as in systems powered by solar batteries.

 

As a Cyber Security Gateway
SE5201B is also designed to act as a cyber security gateway. Un-secured network access will be denied by the firewall protection, while secured VPN tunnels enhance the security of your data transmission during the network communication. Security and encryption are indispensable to IoT, and therefore fundamental functions of SE5201B.

 

 

 

 

Hardware Specifications
Model NameSE5201B Series
Cellular Interfaces
StandardsLTE Cat 1
Ethernet Interfaces
Standards802.3 for 10BaseT(X)
802.3u for 100BaseT(X)
Ports2 x RJ-45 10/100 BaseT(X), 1.5kV isolation
GNSS
StandardsGPS/GLONASS/BeiDou/Galileo/QZSS
Serial Interfaces
Connector Type9-Pin D-Sub or 5-Pin Terminal Block
Ports1 x RS-232/RS-485-2W, software selectable
Baud Rate1200 to 460,800 bps
ParityNone, Odd, Even
Data Bits5, 6, 7, 8, software selectable
Stop Bits1, 2, software selectable
Flow ControlNone, Xon/Xoff, RTS/CTS (RS-232 only)
Terminal Resistor (Ω)120
Pull High/Low Resistor (Ω)On: 1K; Off: 100K
External I/O Interfaces
Digital Input & Output1 x DI, Photo coupled isolated (5VDC)
1 x DO, Digital Relay Output (1A@24VDC)
Default/Reset Button1 key
Mode Button1 key
SIM card slots1 or 2 push-pull SIM card holder
SD Slot1x Micro SD slot
LED Indicators
Power LED1x Green LED
Run LED1x Green LED
COM LED1x Tx Green LED; 1x Rx Green LED
DI/DO LED1x DI LED; 1x DO Green LED
LTE Signal4X Green LED
Antennas
Cellular2 x SMA(M) Antenna for LTE Cat.1
GNSS (Optional)1 x Wide-Band
Power Characteristics
Connector TypeTerminal Block
Input Voltage9 to 48 VDC
Power Consumption Idle < 3W@12VDC; Hibernate < 100mW@12VDC
Reverse Polarity ProtectionYes
Physical Characteristics
HousingMetal housing, IP30 Protection
Dimension (W x H x D)136 x 95 x 30 mm
Weight TBD
InstallationDIN-Rail, Wall mount (Optional)
Reset ButtonYes
Environmental Limits
Operating Temperature-30 to +75 °C
Storage Temperature-40 to + 85 °C
Ambient Relative Humidity5% to 95% (non-condensing)
Ingress Protection RatingIP30
Software Specifications
ProtocolsTCP/IP, UDP, ARP, DHCP, SMTP, SNMP, Https, SNMP v1/v2/v3
SecurityOpenVPN, IPSEC, L2TP
Virtual COMYes
FirewallACL, NAT, Port-forwarding
VPNIPSEC, OpenVPN, L2TP
System ManagementWEB, SSH, Telnet
Power ManagementScheduled power management
- Sleep mode
- Hibernation mode

Multi waken-up mechanisms from sleep/hibernation modes
- Timer
Regulatory Approvals
SafetyEN62368-1, CNS15598-1
EMCCNS 15936
EN55032, EN61000-6-4,
EN55035, EN61000-6-2,
FCC Part 15B
CECellularEN301489-1/-52,
EN301908-1
GNSSEN303413, EN301489-19
FCCFCC Part 15B, Part 22H/24E/27L/90
NCCCNS 15936/15598-1
TestItemValueLevel
IEC 61000-4-2ESDContact
Discharge
Air Discharge
±4KV
±8KV
2
3
IEC 61000-4-3RSEnclosure Port10 (V/m) , 80-1000MHz
3 (V/m), 1.4-6.0GHz
3
3
IEC 61000-4-4EFTDC Power Port
Signal Port
±1.0KV@ 5.0kHz
±1.0KV @ 5.0kHz
2
3
IEC 61000-4-5SurgeDC Power Port
Signal Port
Line-to-Line ±0.5KV
Line-to-Earth ±1.0KV
Line-to-Earth ±1.0KV
2
2
2
IEC 61000-4-6CSDC Power Port
Signal Port
10V, 150KHz to 80MHz, 80%AM
10V, 150KHz to 80MHz, 80%AM
3
3
IEC 61000-4-8PFMFEnclosure30A/m (r.m.s), 50Hz or 60Hz4
ShockIEC 60068-2-27
FreefallIEC 60068-2-32
VibrationIEC60068-2-64
Others- ROHS, including 2015 amendment
- REACH
- TSCA (US)
- TPCH (US)
- Conflict mineral free
MTBFTBD
Warranty5 years

DIMENSIONS & LAYOUT

ModelPart NumberCellularBandRS232/485 Serial PortSIM SlotsGPS
SE5201B-Q-T-C1-DB-EU1P1SE5201B0011GLTE Cat.1B1/B3/B7/B8/B20/B281x DB91-
SE5201B-Q-T-C1-DB-EU-GPS1P1SE5201B0012GLTE Cat.12Yes
SE5201B-Q-T-C1-TB-EU1P1SE5201B0013GLTE Cat.11x TB51-
SE5201B-Q-T-C1-TB-EU-GPS1P1SE5201B0014GLTE Cat.12Yes
SE5201B-Q-T-C1-DB-US1P1SE5201B0001GLTE Cat.1B2/B4/B5/B12/B131x DB91-
SE5201B-Q-T-C1-DB-US-GPS1P1SE5201B0002GLTE Cat.12Yes
SE5201B-Q-T-C1-TB-US1P1SE5201B0003GLTE Cat.11x TB51-
SE5201B-Q-T-C1-TB-US-GPS1P1SE5201B0004GLTE Cat.12Yes
SE5201B-E-T-C1-DB1P1SE5201B0017GLTE Cat.1B1/B3/B7/B8/
B20/B28
1x DB91-
SE5201B-E-T-C1-DB-GPS1P1SE5201B0019GLTE Cat.12Yes
SE5201B-E-T-C1-TB1P1SE5201B0018GLTE Cat.11x TB51-
SE5201B-E-T-C1-TB-GPS1P1SE5201B001AGLTE Cat.12Yes

Firmware

Version Name Time Size Download
v0.13 SE5201B Firmware(Quectel module) 2023-05-04 14.44 MB
v1.04 SE5201B Firmware(Telit module) 2023-05-04 14.45 MB

Datasheet

Version Name Time Size Download
v1.3 Datasheet EN 2023-11-01 402 KB
v1.2 Datasheet EN 2023-08-10 394.19 KB
v1.1 Datasheet EN 2023-06-01 392.09 KB
v1.0 Datasheet EN 2023-04-26 411.13 KB

Manual

Version Name Time Size Download
v1.0 SE5201B/CR5201B User Manual 2023-04-26 3.43 MB

Hardware Installation Guide

Version Name Time Size Download
v1.0 SE5201B/CR5201B Hardware Installation Guide 2023-04-26 7.54 MB

STP/DXF drawings

Version Name Time Size Download
SE5201B STP 2023-04-27 8.67 MB

Test reports

Version Name Time Size Download
SE5201B EU Declarations of Conformity 2023-05-03 370.22 KB
SE5201B Certifications NCC 2023-05-11 2.77 MB
SE5201B Certifications CB 62368-1 2023-04-28 226.62 KB
SE5201B Certifications CE 2023-04-28 660.51 KB
SE5201B Certifications FCC 2023-04-28 198.65 KB

I have read and agree to the Privacy Policy (art.13 and 14 of the GDPR - EU Regulation 2016/679).