AWR5805 Series

Wi-Fi Mesh Router

  • Wi-Fi 5 2x2 MU-MINO with 802.11ac peak speed 867 Mbps
  • Easily Expandable Mesh WiFi System
  • 1 x RJ45 for 10/100/1000Mbps BaseT WAN
  • 4 x RJ45 for 10/100/1000Mbps BaseT LAN
  • DNV-GL Marine application
  • 1x micro-SD slot for flexible use
  • Firewall and VPN for security connection
  • Backup WAN interfaces for connection reliability
  • Industrial EMC protection, -40 to +75ºC wide-range temperature operation
  • Rugged metal case with wall or DIN-Rail mount
  • PoE PD support for flexible deployment
New
AWR5805 Series

ATOP AWR is an advanced device that allows a very tangible scale-up of almost any industrial wireless infrastructure. In addition to high EMC protection, wide-temperature operation, superb hardware and advanced features, AWR will provide high-speed internet access with load balancing and high degrees of security, high speeds and advanced configuration options.

Quad-ARM Cortex A7 CPU: AWR integrates an industrial-grade Quadcore A7 ARM CPU, enabling the processing power you need to filter heavy traffic over firewalls, routing, forwarding and security meansures.

Wi-Fi Mesh: AWR’s advanced chipset allows you to set up several devices as a mesh network, achieving a self-healing network that adjusts its topology based on need--perfect for dynamic applications.

High-Performance: With its integrated IEEE802.11ac wave-2 feature and supporting 2x2 concurrent MUMIMO RF, AWR provides high-throughput connections through 2.4 GHz and 5.0 GHz bands.

Security: Integrating firewall, zone forwarding, and VPN features, ATOP AWR allows you to connect your industrial network to the internet without fearing intrusions into your organization data.

Harsh Environments: ATOP AWR is proven to run at its maximum loading in the harshest EMC and climate environments.

Reliability: With a rugged metal housing and power redundancy, AWR is resistive to damage in harsh industrial environments.

 

APPLICATION CASE

As a Wi-Fi DBDC Router

AWR5805’s simplest operating mode is as a router/access point. Use it to connect to the internet through your broadband provider via PPPoE, Static IP or DHCP and provide internet connection to Wi-Fi and wired clients. With AWR you can define your own wireless access policy and set up a Firewall and VPN connection based on your needs.

 

As a Wi-Fi Mesh Primary Router

AWR5805 is designed to act as a mesh router or as a mesh node, and the configuration of one or both radios to work in mesh mode takes barely any time. No more fussing with topology changes or complicated wiring!

With Wi-Fi mesh, all nodes can communicate with each other and the transmission paths are dynamically adjusted if a change in signal strength or
topology is detected. So, even if a device is temporarily unaccessible due to interference or position, the network will still work perfectly. Mesh functionality can be combined with all other features of AWR5805.

 

Hardware Specifications 
CPUARM Cortex A7, Quad-Core
WatchdogHardware WD Reset: Yes
Network Interface  
Wi-Fi802.11ac wave 2(5GHz), 802.11a/b/g/n(2.4GHz/5GHz)
MU-MIMO 2x2 (2 streams)
Wi-Fi Mesh ready
Ethernet portsStandardIEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3ab for 1000BaseT(X)
Ethernet portsPorts
5x 10/100/1000 BASE-TX RJ-45
1 x WAN
4 x LAN
Antennas
Wi-Fi2x SMA(M) antennas
External IO Interfaces
Default/Reset Button1 key
SD Slot1x micro-SD slot
LED IndicatorsPWR, 2.4GHz Wi-Fi, 5.0 GHz Wi-Fi, LAN, WAN
Power 
Voltage InputDC Power : 12 to 48V
Consumption< 18W
RedundancyNo
Connector3-pin Terminal block
Reverse Polarity ProtectionYes
PoE PoE PD, 802.3at, Mode A
Physical Characteristics 
HousingMetal housing
Dimension L x W x H (mm)145 x 120 x 46
Weight726g
InstallationDIN-Rail or Wall-Mount (optional kit)
Ingress Protection RatingIP30 protection
Environmental Limits
Operating Temperature-40°C to +75°C (-22°F to +158°F)
Storage Temperature-40°C to +85°C (-40°F to +185°F)
Ambient Relative Humidity5% to 95% RH, (non-condensing
Software Specifications  
NetworkIPv4/IPv6DHCP server
DHCP Client/Static IP/PPPoE
Connection Telnet, SSH, TFTP/SFTP, Http, Https, SNMP
Other ProtocolsNTP, DNS, 802.1Q VLAN, QoS, VRRP, MQTT
SecurityFirewallAccess control list (ACL)
Port Forwarding
Attack Prevention (Inserted after Port forwarding)
VPNIPSEC, OPEN-VPN, LT2P, PPTP
ReliabilityDev RedundancyVRRP
Schedule operationSchedule control of application
WLANWi-Fi ConnectionAP (802.11 a/b/g/n/ac), Mesh
Wi-Fi SecurityOWE/WPA-PSK/WPA2-PSK/WPA3-PSK (SAE)
ManagementSystem ConfigurationWEB, Telnet, SSH
Firmware upgradeWEB, TFTP
System LogLog data to Local memory, remote logger, local flash
SNMPSNMP v1/v2/v3
DiagnosticsPing, Traceroute, Nslookup
Remote ManagementATOP OKRA remote management system
StatisticsMemory, Mobile, WAN, Wireless, LAN
CertificationStandard
SafetyUL/IEC 62368-1, IEC60950-1, EN62368-1
EMCEN55032, EN61000-6-4, EN55024, EN61000-6-2, FCC Part 15B, FCC Part 18
Wi-FiEN300328 for WIFI b/g/n 2.4G, EN301893 for WIFI a/n/ac 5G, EN62311 MPE Report, Part
15C for 2.4G b/g/n, Part 15E for 5G B1/B4 a/n/ac
StandardItemTestValueLevel
IEC 61000-4-2ESDContact Discharge
Air Discharge
±6KV
±8KV
3
3
IEC 61000-4-3RSEnclosure Port10 (V/m) , 80-1000MHz
3 (V/m), 1.4-2.0GHz
10 (V/m), 2.0~2.7GHz
3
3
3
IEC 61000-4-4EFTDC Power Port
Signal Port
±2.0KV@ 5.0kHz
±1.0KV @ 5.0kHz
3
3
IEC 61000-4-5SurgeDC Power Port
Signal Port
Line-to-Line ±1KV
Line-to-Earth ±2KV
Line-to-Earth ±2.0KV
3
3
3
IEC 61000-4-6CSDC Power Port
Signal Port
10V, 150KHz to 80MHz, 80%AM
10V, 150KHz to 80MHz, 80%AM
3
3
IEC 61000-4-8PFMFEnclosure30A/m (r.m.s), 50Hz or 60Hz4
Certification
ShockIEC 60068-2-27
DropIEC 60068-2-32
VibrationIEC 60068-2-64
OthersRoHS, including 2015 amendment
REACH
Conflict Mineral Free
Warranty5 years

DIMENSIONS & LAYOUT

MODEL NAME ETHERNETWI-FIBTLoRaPoEGPS
AWR58051x WAN, 4x LAN802.11/a/b/g/n/ac----
AWR5805P1x WAN, 4x LAN802.11/a/b/g/n/ac--Yes-
MODEL NAME PART NUMBERDESCRIPTION
AD1048-24FS50500481240001G
DIN-Rail Power Supply
Input: 100-240VAC / 120-370VDC; Output: 2A@24VDC
UV336-123050500361120001GPower adapter
Input: 100-240VAC; Output: 3A@12VDC; US plug

Datasheet

Version Name Time Size Download
v1.0 Datasheet EN 2022-02-15 400.66 KB

Hardware Installation Guide

Version Name Time Size Download
v0.1 AWR5805 Hardware Installation guide 2022-02-15 21.88 MB

Test reports

Version Name Time Size Download
v1.0 NCC Certification 2022-02-15 2.57 MB

Featured Products

AOPT-SFP-8008I

Copper to Fiber Optic Transceiver:  10 / 100 Mbps, Auto-Negotiation, Interface-SERDES, 3.3V

  • 10 / 100 Mbps data rate
  • Auto-Negotiation
  • SERDES Interface
  • 3.3V power supply
  • Lan Cable: Over Cat5
  • Operating temperature from -40° to 85° C
 

Atop NMU

Network Management Utility

  • Discover and visualize network devices and physical connections automatically
  • Manage configurations and firmware for ATOP switches centrally
  • Set up smart alarms and notifications for events by defining custom-threshold and duration
  • Group and manage Ethernet by different IP ranges

EH3005

Unmanaged Gigabit Ethernet Switch, 5-Port Slim-Type, Plastic Housing

  • 5 x 10/100 BaseT(X) RJ45 port
  • Broadcast storm protection
  • Support IEEE802.3/802.3u/802.3x
  • Support 802.1q/p for VLAN tagging and class of service
  • Auto MDI/MDI-X
  • Redundant DC power inputs
  • Operation temperature from 0 °C to 60 °C
  • DIN-Rail mounting
  • Slim type, plastic housing

EHG6408 Series

Industrial 8-port unmanaged 24V PoE Gigabit Switch with voltage booster (12~57V)

  • 8 x 10/100/1000 BASE-T(X) ports or
  • 8 x 10/100/1000 BASE-T(X) ports with 2 x 100/1000 SFP slots or
  • 8 x 10/100/1000 BASE-T(X) ports with 2 x 1000 BASE-X SFP slots
  • Optional PoE ports with booster function (12~57 VDC)
  • IP30 aluminum with DIP-Rail / Wall mount (optional)
  • Operating range of -40°C to +75°C
  • CB/IEC60950-1&62368-1 and UL/cUL62368-1

SS100

Compact plug-on RS-232 to RS-485/422 media converter

  • Maximum Communication Speed: 500Kbps
  • Industrial Grade Temperature: -40~85°C
  • ESD Protection (IEC 61000-4-2: ESD level 3 protection)
  • External power not required (When RTS/DTR signal line is enabled)
  • Compact size
  • Hardware-based Auto Toggling
  • RS422/RS485 mode selectable by external switch
  • Built-in 120Ω termination resistors, selected by external switch
  • 3kV isolation
  • LED port power indicator