New
SE5901 SDK Series
SE5901 SDK Series
SE5901 SDK Series
SE5901 SDK Series
SE5901 SDK Series

SE5901 SDK Series


1-Port Ethernet to Serial Industrial Embedded Edge Computer

  • Ideal for IoT and IIoT applications; supports Node-RED and dashboard
  • Wide -40°C~85°C temperature range for Industrial-grade reliability
  • High-performance IPsec VPN throughput; data-rate up to 37.9Mbps*
  • 2 x 10/100Mbps Ethernet port
  • 1 x RS-232/422/485 port – baud rate up to 921.6 Kbps
  • 1 x USB2.0 high speed OTG port
  • Optional 802.3af PoE models can be powered by Ethernet cable
  • ATOP customized Linux SDK environment with reliable APIs
  • Rugged metal housing with wall or DIN-Rail mount support
  • Industrial EMC protection

* test carried out with one VPN-IPsec Tunnel, Peer-to-Peer mode, Ethernet cable.

Providing connectivity for the Internet of Things
ATOP’s Industrial Embedded Computer is your ideal flexible Gateway to the Internet of Things. It provides Serial and Ethernet connectivity in a reliable and powerful Industrial Grade platform that can unlock your potential. Based on your specific application, it allowing almost any serial device to be connected, providing and retrieving the data you need to and from the cloud, no matter what provider you’re using.

Programmability
Write your customized application in C language and Run it on its powerful Industrial low-power 800MHz ARM Cortex A8 TI Sitara AM3354 CPU. Make flexible use of your peripherals, no matter storage, Serial, or USB are needed.
SE5901 is available as a Standard SDK or Node-RED version.
The Node-RED version, embedding a Node-RED USB pen-drive, adds to the powerful hardware platform, the possibility add the ATOP-Customized Node-RED environment and an user-friendly Device Configuration UI. Node-RED, an open source Building-Block programming environment, will allow you to build your IoT application from an user-friendly, hardware-tailored application design environment and dashboard.

Rugged and flexible for advanced developments
SE5901 embeds high EMC protection, wide temperature operation, programming and installation flexibility in one device. A dedicated PoE version allows you to power the device through Power over Ethernet (IEEE 802.3af) technology, without the need of a separate space consuming power supply.

SE5901 (SDK) block diagram

 

Application

The IoT (Internet of Things) or IIoT (Industrial Internet of Things) is a trending topic these days. It’s all about bringing devices, sensors, actuators, data and commands to the cloud, with the ultimate goal to improve the quality of life, the services Smart Cities can offer, saving energy or saving money. This requires two things: to vehiculate the collected data to the cloud in a format that can be recognized and processed and to process, compute and analyze all this amount of data in real time.
It is not a concept far from reality. Imagine you’d like to bridge a Modbus Sensor to the cloud. And you’d like to have the application running on the cloud to be able to process multiple sensors’ data, and to trigger some event in some specific stations along the network. You may also have the need to override the cloud control and manage the application locally. Any application has its story.

Here at ATOP, we understand these different needs and we are providing you different working models, based on what your needs are.

Use the Standard SDK, programmable embedded computer if:

  • You are familiar with Linux OS
  • You have ANSI C programming skills
  • Your application is strictly time/ performance sensitive
  • Your application has very critical exception handling requirements


Our SDK products provide:

  • Ported, proven and tested peripherals (such as Ethernet, Serial, etc.) and integrated drivers
  • ATOP customized Linux Kernel and network protocols
  • Ported, debugged and proven third party applications
  • Utilities and APIs to control the hardware in an easy  and effective way
  • Example of source code

 


Use ATOP’s Node-RED version with the preloaded USB Stick if:

  • You’re hands-on, with a good understanding of protocols, data formats
  • You have some basic Javascript knowledge
  • You’re looking for a simple, user-friendly and effective way to deploy your applications to the cloud, with a user friendly monitoring dashboard
  • You don’t have strict performance requirements, and exception handling is not critical

Our Node-RED version provides:

  • Node-RED visual application development environment and dashboard, with automatic start on device boot-up, Node.JS based
  • ATOP-customized dedicated Web-UI for user friendly device set-up, allowing you to create VPN tunnels, set-up the network settings, date/time, NTP, diagnostics and much mode without using Linux command line.
  • Different level of security to allow developers to access development  environment and users to access dashboard only
  • Customized Node-RED APIs (blocks) that will allow you to fully control ATOP powerful hardware and control Buzzer, diagnostics and much more
  • Integrated Modbus and MQTT stacks, for seamless communication with field devices and cloud
  • Integrated AWS, Azure, Google and IBM Bluemix Nodes.

 

 

NodeRED development Enrivonment

Hardware Specifications 
CPUTexas Instruments Sitara ARM Cortex A8 AM3354 800MHz
Flash16 MB NOR Flash (customizable upon request up to 128 MB)
Node-RED version: 32 MB NOR Flash
RAMSDK version: 128 MB DDR2 (customizable upon request up to 256 MB)
Node-RED version: 256 MB DDR2
EEPROM24LC64
WatchdogADM706
Real Time Clock (RTC)Yes - with external chip
BuzzerYes
Console PortYes - on-board connector
Reset ButtonYes
Network Interface
StandardsIEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
Ethernet Ports2x 10/100BASE-TX RJ-45
Power over EthernetIEEE 802.3af on LAN2 (PoE version only)
Serial Interface
ConnectorD-Sub9 RS-232/485 software selectable (DB model)
5-Pin 5.08mm Terminal Block
Ports1 port RS-232/422/485 (2 and 4-wire)
Pull-high / Pull-low /Term. resistorsSelectable by DIP switch.
Baud Rate50 ~ 921,600bps
Data Bits7, 8
Stop Bits1, 2
Flow ControlNone, Xon/Xoff, RTS/CTS (RS-232 only)
Other interfaces
USB ports1 x USB A Type (USB 2.0) - High-Speed OTG + power
Power
Input Voltage9-48 VDC or 24 VAC
Connector3-Pin 5.08mm Lockable Terminal Block
Power Consumption0.65A @ 9VDC (6 W Max)
Reverse Polarity ProtectionYes
Mechanical
HousingIP30 protection, SPCC metal housing
Dimensions(W x H x D)32 x 110 x 90 mm (1.26 x 4.33 x 3.54 in)
InstallationDIN-Rail or Wall-Mount (optional kit)
Weight400 g
Reset ButtonYes
Environmental
Operating Temperature-40°C~85°C (-40°F~185°F)
Storage Temperature-40°C~85°C (-40°F~185°F)
Ambient Relative Humidity5%~95%, (Non-condensing)
Software
BootloaderU-boot 2014.07
Linux kernelLinux 3.14.26
Linux toolchainLinux 32 bits toolchain gcc (C/C++ PC cross compiler), glibc
Linux sample codeRS232, RS485, RTC, watchdog, LED, Buzzer, Button, network socket
Additional features
(Node-RED version only)
Pre-installed Node-RED USB stick, with auto-run on startup. Dedicated Web UI for device settings. Integrated DHCP, IPv4, NTP/SNTP client, SNMP v1/v2c/v3, OpenVPN client/server, IPsec, and PPTP.
CertificationStandard
SafetyEN60950-1:2006 (Low-Voltage Directive)
EMCFCC Part 15, Subpart B, Class A
EN 55032, EN 55024, EN 61000-3-2, EN 61000-3-3, EN 61000-6-2, EN 61000-6-4
RoHS 2Yes
REACHYes
StandardItemTestValueLevel
IEC 61000-4-2ESDContact Discharge±8kV4
IEC 61000-4-2ESDAir Discharge±15kV4
IEC 61000-4-3RSRadiated (enclosure)10 V/m3
IEC 61000-4-4EFTDC Power Port±2.0kV3
IEC 61000-4-4EFTSignal Port±2.0KV3
IEC 61000-4-5SurgeDC Power Port (L-2-L)±1.0KV3
IEC 61000-4-5SurgeDC Power Port (L-2-E)±2.0KV3
IEC 61000-4-5SurgeSignal Port (L-2-E)±2.0KV3
IEC 61000-4-6CSConducted (enclosure)10 V rms3
IEC 61000-4-8PFMFEnclosure10 A/m3
IEC 61000-4-11DIPPower Port-A
CertificationStandard
ShockIEC 60068-2-27
DropIEC 60068-2-32
VibrationIEC 60068-2-64
Warranty5 Years
MTBF21.16 years (MIL-HDBK-217F-based prediction)
MODEL NAMEETHERNET PORTSSERIAL PORTSREMARKS
SE5901-DB (SDK) or -NR (Node-RED)2 (RJ45)1 (DB9)
SE5901-TB (SDK) (SDK) or -NR (Node-RED)2 (RJ45)1 (TB)
SE5901-PoE-DB (SDK) (SDK) or -NR (Node-RED)2 (RJ45)1 (DB9)PoE PD (802.3af)
SE5901-PoE-TB (SDK) (SDK) or -NR (Node-RED)2 (RJ45)1 (TB)PoE PD (802.3af)
MODEL NAMEPART NUMBERDESCRIPTION
UN315-1212 (US-Y)50500151120003GY-Type power adaptor, 100~240VAC input, 1.25A @ 12VDC output, US plug, LV6
UNE315-1212 (EU-Y)50500151120013GY-Type power adaptor, 100~240VAC input, 1.25A @ 12VDC output, EU plug, LV6
ADP-DB9(F)-TB559906231GFemale DB9 to Female 3.81 TB5 Converter
WMK-315-Black70100000000050GBlack Aluminum Wall Mount Kit

Datasheet

VersionNameTimeSizeDownload
v0.3Datasheet EN2018-08-24576.18 KB
v0.2Datasheet EN2017-11-10584.24 KB

Manual

VersionNameTimeSizeDownload
v1.2SE59XX SDK User Manual2018-05-022.25 MB
v1.1SE59XX SDK User Manual2018-02-052.41 MB
v1.4SE59XX Node-RED User Manual2019-04-225.72 MB
v1.2SE59XX Node-RED User Manual2018-08-245.59 MB

Hardware Installation Guide

VersionNameTimeSizeDownload
v1.1SE5901/MB5901/PG5901 Hardware Installation Guide2015-07-15921.06 KB