New
SE5908 SDK Series
SE5908 SDK Series
SE5908 SDK Series
SE5908 SDK Series
SE5908 SDK Series
SE5908 SDK Series

SE5908 SDK Series


8-Port Ethernet to Serial Rack-Mount Industrial Embedded Edge Computer

  • Ideal for IoT and IIoT applications; supports Node-RED and dashboard
  • Wide -20°C~70°C temperature range for Industrial EMC Protection
  • High-performance IPsec VPN throughput; data-rate up to 37.9Mbps*
  • 2 x 10/100Mbps Ethernet port
  • 8 x RS-232/422/485 port – selectable baud rate up to 921.6 Kbps
  • 3 kV optional isolation on the serial ports (supports RS-485/422 only)
  • SD Card slot
  • Customizable LCM matrix and keypad
  • ATOP customized Linux SDK environment with reliable APIs
  • 100~240VAC or 24~48VDC power input; one Relay Output alarm
  • Rugged metal housing in 1U Rack-mount (rack-mount kit included)

* test carried out with one VPN-IPsec Tunnel, Peer-to-Peer mode, Ethernet cable.

Providing connectivity for the Internet of Things
SE5908 (SDK), ATOP's Industrial Embedded Computer is your ideal flexible Gateway to the Internet of Things. It provides Serial, Ethernet connectivity and interfaces that can unlock your potential. Based on your specific application, it allowing almost any serial device to be connected, providing and retrieving the data you need to and from the cloud, no matter what provider you’re using.

Programmability
Write your customized application in C language and Run it on its powerful Industrial low-power 800MHz ARM Cortex A8 TI Sitara AM3354 CPU. Make flexible use of your peripherals, no matter storage, Serial, or USB are needed.
SE5908 is available as a Standard SDK or Node-RED version.
The Node-RED version, embedding a Node-RED SD-card, adds to the powerful hardware platform, the possibility add the ATOP-Customized Node-RED environment and an user-friendly Device Configuration UI. Node-RED, an open source Building-Block programming environment, will allow you to build your IoT application from an user-friendly, hardware-tailored application design environment and dashboard.

Rugged and flexible for advanced developments
SE5908 embeds high EMC protection, wide temperature operation, programming and installation flexibility in one device. The device is available in two power input options (100~240VAC or 24~48VDC) and provides one additional relay output

SE5908/ SE5916 (SDK) block diagram

Application
The IoT (Internet of Things) or IIoT (Industrial Internet of Things) is a trending topic these days. It’s all about bringing devices, sensors, actuators, data and commands to the cloud, with the ultimate goal to improve the quality of life, the services Smart Cities can offer, saving energy or saving money. This requires two things: to vehiculate the collected data to the cloud in a format that can be recognized and processed and to process, compute and analyze all this amount of data in real time.
It is not a concept far from reality. Imagine you’d like to bridge a Modbus Sensor to the cloud. And you’d like to have the application running on the cloud to be able to process multiple sensors’ data, and to trigger some event in some specific stations along the network. You may also have the need to override the cloud control and manage the application locally. Any application has its story.
Here at ATOP, we understand these different needs and we are providing you different working models, based on what your needs are.

Use the Standard SDK, programmable embedded computer if:

  • You are familiar with Linux OS
  • You have ANSI C programming skills
  • Your application is strictly time/ performance sensitive
  • Your application has very critical exception handling requirements


Our SDK products provide:

  • Ported, proven and tested peripherals (such as Relay, Ethernet, Serial, etc.) and integrated drivers
  • ATOP customized Linux Kernel and network protocols
  • Ported, debugged and proven third party applications
  • Utilities and APIs to control the hardware in an easy and effective way
  • Example of source code

Use ATOP’s Node-RED version with the embedded SD-card if:

  • You’re hands-on, with a good understanding of protocols, data formats
  • You have some basic Javascript knowledge
  • You’re looking for a simple, user-friendly and effective way to deploy  your applications to the cloud, with a user friendly monitoring dashboard
  • You don’t have strict performance requirements, and exception handling  is not critical

Our Node-RED version provides:

  • • Node-RED visual application development environment and dashboard,
    with automatic start on device boot-up, Node.JS based
  • ATOP-customized dedicated Web-UI for user friendly device set-up, allowing you to create VPN tunnels, set-up the network or the Cellular settings, date/ time, diagnostics and much mode without using Linux command line.
  • Different level of security to allow developers to access development  environment and users to access dashboard only
  • Customized Node-RED APIs (blocks) that will allow you to fully control ATOP powerful hardware and control relays, Buzzer, diagnostics and much more
  • Integrated Modbus and MQTT stacks, for seamless communication with field devices and cloud
  • Integrated AWS, Azure, Google and IBM Bluemix Nodes.

 

 

NodeRED development Enrivonment

 

Hardware Specifications 
CPUTexas Instruments Sitara ARM Cortex A8 AM3354 800MHz
Flash32 MB NOR Flash (customizable upon request up to 128 MB)
RAM256 MB DDR3 (customizable upon request up to 512 MB)
EEPROM24LC64
WatchdogADM706
Real Time Clock (RTC)Yes - with external chip
BuzzerYes
Reset ButtonYes
Network Interface
StandardsIEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
Ethernet Ports2x 10/100 BASE-TX RJ-45
Serial Interface
ConnectorRJ45 Connector
Ports8 ports (RS-232/RS-422/RS-485, RS-422/RS-485 on Isolation vers.)
Serial Console1x Serial Console port (RJ45)
Serial Port Isolation2.5 kV (SiS version only) - Isolation version supports only RS-422/RS-485
Pull-high / Pull-low /Term. resistorsSoftware Selectable
Baud Rate50 ~ 921,600bps
Data Bits5, 6, 7, 8
Stop Bits1, 2
Flow ControlNone, Xon/Xoff, RTS/CTS (RS-232 only)
Other interfaces
USB ports1 x USB A Type (USB 2.0) - internal 1-port High-Speed OTG + power
LCM MatrixProgrammable LCM Matrix with 5-buttons
SD CardSD card slot (internal)
Power
Input VoltageDC version: 24 - 48VDC; US-EU version: 100~240 VAC (EU or US Plug)
Power RedundancyNo
Relay Output1x 1A@30VDC (Normal open)
ConnectorDC version: 5.08mm 3-pin Lockable Terminal Block
EU-US version: IEC 60320-1 C14 AC Power Inlet
Power ConsumptionDC version: 0.54 A @24VDC; Max 21W
US-EU version: 0.21A@100VAC, Max 21W
Reverse Polarity ProtectionYes (DC version only)
Mechanical
HousingIP30 protection, SPCC metal housing
Dimensions(W x H x D)436 mm x 43.5 mm x 200 mm
Installation19’’ Rack-Mount (Kit included)
Weight3,000g
Reset ButtonYes
Environmental
Operating Temperature-20°C~70°C (-4°F~158°F)
Storage Temperature-40°C~85°C (-40°F~185°F)
Ambient Relative Humidity5%~95%, (Non-condensing)
Software
BootloaderU-boot 2014.07
Linux kernelLinux 3.14.26
Linux toolchainLinux 32 bits toolchain gcc (C/C++ PC cross compiler), glibc
Linux sample codeRS232, RS485, RTC, watchdog, LED, Buzzer, Button, network socket
Additional features
(Node-RED version only)
Pre-installed Node-RED USB stick, with auto-run on startup. Dedicated Web UI for device settings. Integrated DHCP, IPv4, NTP/SNTP client, SNMP v1/v2c/v3, OpenVPN client/server, IPsec, and PPTP.
CertificationStandard
SafetyEN60950-1:2006/ IEC60950-1 Low Voltage Directive
EMCFCC Part 15, Subpart B, Class B
EN 55022, Class B, EN 61000-3-2, EN 61000-3-3, EN 55024
RoHS 2Yes
REACHYes
StandardItemTestValueLevel
IEC 61000-4-2ESDContact Discharge±8kV4
IEC 61000-4-2ESDAir Discharge±15kV4
IEC 61000-4-3RSRadiated (enclosure)10 V/m3
IEC 61000-4-4EFTAC Power Port±4.0kV4
IEC 61000-4-4EFTDC Power Port±4.0kV4
IEC 61000-4-4EFTSignal Port±2.0KV3
IEC 61000-4-5SurgeAC Power Port (L-2-L)±2.0KV4
IEC 61000-4-5SurgeAC Power Port (L-2-E)±4.0KV4
IEC 61000-4-5SurgeDC Power Port (L-2-L)±1.0KV3
IEC 61000-4-5SurgeDC Power Port (L-2-E)±2.0KV3
IEC 61000-4-5SurgeSignal Port (L-2-E)±2.0KV4
IEC 61000-4-6CSAC Power Port10 V rms3
IEC 61000-4-6CSDC Power Port10 V rms3
IEC 61000-4-6CSSignal Port10 V rms3
IEC 61000-4-8PFMFEnclosure1 A/m3
IEC 61000-4-11DIPAC Power Port--
CertificationStandard
ShockIEC 60068-2-27
DropISTA Test Procedure 2A
VibrationIEC 60068-2-64
Warranty5 Years
MTBFSE5908-DC: 22.74 years; SE5916-US/EU: 13.95 years;
SE5908-SiS-DC: 19.00 years; SE5908-SiS-US/EU: 19.03 years;
SE5916-SiS-DC: 13.38 years; SE5916-SiS-US/EU: 13.38 years
MODEL NAMEETHERNET PORTSSERIAL PORTSPOWER INPUTREMARKS
SE5916-N-DC (SDK) or -NR (for Node-RED)2 (RJ45)16 (RJ45)24~48VDC
SE5916-SiS-DC (SDK) or -NR (for Node-RED)2 (RJ45)16 (RJ45)24~48VDC2.5kV serial isolation
SE5916-N-EU (SDK) or -NR (for Node-RED)2 (RJ45)16 (RJ45)100~240VAC (EU)
SE5916-N-US (SDK) or -NR (for Node-RED)2 (RJ45)16 (RJ45)100~240VAC (US)
SE5916-SiS-EU (SDK) or -NR (for Node-RED)2 (RJ45)16 (RJ45)100~240VAC (EU)2.5kV serial isolation
SE5916-SiS-US (SDK) or -NR (for Node-RED)2 (RJ45)16 (RJ45)100~240VAC (US)2.5kV serial isolation
MODEL NAMEPART NUMBERDESCRIPTION
SDR-75-2450500752240001G75W/3.2A DIN-Rail 24VDC power supply with 88~264VAC / 124~370VDC input
AD17-24C (US-Y)50500151240002GY-Type power adaptor,100-240VAC input, 0.6A @ 24VDC output, US plug
AD17-24D (EU-Y)50500151240012GY-Type power adaptor,100-240VAC input, 0.6A @ 24VDC output, EU plug
GDC-12059906861G120mm copper woven grounding cable
CBL-RJ45(8P)-DB9(M)-9050891781GRJ45 to DB9 Male Cable, 90cm
CBL-RJ45(8P)-DB9(M)-20050891951GRJ45 to DB9 Male Cable, 200cm
CBL-RJ45(8P)-DB9(F)-9050891791GRJ45 to DB9 Female Cable, 90cm
CBL-RJ45(8P)-DB9(F)-90-C50891971GRJ45 to DB9 Female Cross Over Cable, 90cm
CBL-RJ45(8)-DB9(F)-200-C50891961GRJ45 to DB9 Female Cross Over Cable, 200cm
RMK-718-Black70100000000040GRack Mount Mounting-Kit, Black
Power Cable (US)50801041G6 feet Power Cable, US
Power Cable (EU)50801051G6 feet Power Cable, EU
Fuse50709441GFuse

Datasheet

VersionNameTimeSizeDownload
v0.4Datasheet EN2018-08-24680.75 KB
v0.3Datasheet EN2018-05-29668.91 KB
v0.2Datasheet EN2017-11-10576.53 KB

Manual

VersionNameTimeSizeDownload
v1.2SE59XX SDK User Manual2018-05-022.25 MB
v.1.1SE59XX SDK User Manual2018-02-052.41 MB
v1.4SE59XX Node-RED User Manual2019-04-225.72 MB
v1.2SE59XX Node-RED User Manual2018-08-245.59 MB

Hardware Installation Guide

VersionNameTimeSizeDownload
v2.0SE5908/MB5908/PG5908 Hardware Installation Guide2019-06-061.87 MB