PG5901 Series
PG5901 Series
PG5901 Series
PG5901 Series
PG5901 Series

PG5901 Series


1-Port RS232/485/422 and 2 x Fast-Ethernet RJ45 DNP3.0, Modbus, IEC 60870-5-101/103/104, IEC 61850 Smart Grid Protocol Gateway

  • Dual 10/100 Mbps Ethernet port, Optional 802.3af PoE PD capable
  • 1-port RS-232/422/485, baud rate up to 921.6 Kbps
  • IP30 Metal housing with Aluminum heat sink
  • Strong EMC protection, works in environments from -40 to 85°C
  • Same hardware platform for different protocol conversion (Modbus TCP/RTU/ASCII, DNP3.0 TCP or serial, IEC 60870-5-101, IEC 60870-5-103, IEC 60870-5-104, IEC 61850)
  • User friendly configuration with a Java-Based Windows utility
  • Embedded IPsec, PPTP and OpenVPN for enhanced security
  • Redundancy through embedded RSTP Protocol

Product Description

The PG5901 Series is a highly reliable and fault tolerant Industrial Protocol Gateway. Its powerful architecture provides seamless conversion between the different protocols Ethernet or Serial based. The serial devices communicating on different protocols could be integrated into the system and extend its reach over the gateway’s redundant Ethernet. This device is designed to work in most demanding industries such as power substations, power generation, oil and gas, farming and manufacturing.

The configuration carried out through a user friendly, Java- Based Windows Utility called eNode Designer. It allows configuring target platforms, set device properties and protocol data point mapping. To do so, a project file representing the system should be created. This will include devices and the protocol applications running on them. The configuration is completely dependent on the “eNode Module” which represents that device or  application – but may include things such as changing the communication port settings and defining where data point information enters and leaves the eNode Designer system.

PG5901 Series embeds an additional layer of security, allowing the devices to be deployed in topologies that request data to flow through the Internet and preventing sensitive control and monitoring data to be readable from malicious activities. IPsec VPN encryption, configurable in both peer-to-peer and peer-to-side modes will make sure the data passing is encrypted through a strong 128, 192 or 256-bit AES encryption.

 

Application

The protocol gateway’s embedded protocol stacks allow
- Seamless conversion
- Exception/error Management
- Unsolicited event management for the protocols requiring them (such as DNP3)
- High performance
- Low cost

The example shows how to Easily connect a Modbus Serial HMI, through Atop’s Protocol Gateway to a DNP3.0 Ethernet slave IED. The host HMI has the role of a Modbus Serial Master while the end-device to be accessed is a DNP3.0 Ethernet Server.
Atop’s protocol Gateway acts towards the HMI seamlessly as a Modbus Serial Slave, answering the poll commands or the write commands required by the Host by its virtual Modbus ID. Meanwhile, it acts as a DNP3.0 Ethernet Client with regard to the end-device whose DNP3.0 address is mapped to the virtual Modbus ID that the HMI is accessing.
Be careful! – all gateway functions listed in the datasheet refer to the “Gateway” role, and not which “host” or “slave” the gateway is connected to. In this example, the SKU shown is “MBSS-DNEC” (Modbus Serial Slave to DNP3.0 Ethernet Client)

Network Interface
SpeedIEEE 802.3 10BaseT
IEEE 802.3u 100BaseT(X)
PoE standard supportedIEEE 802.3 af (PoE)
Connector portsRJ45 x 2
Serial Interface
Connector5-Pin 5.08mm Terminal Block or D-Sub9 connector
Ports1
Baud Rate1,200 ~ 921,600 bps software selectable
Data Bits7, 8 software selectable
Stop Bits1, 2 software selectable
Flow ControlNone, Xon/Xoff, RTS/CTS
Other Interfaces
USB Ports1
SpeedUSB 2.0
ConnectorUSB A Type
Software
ProtocolsIPv4, ARP, ICMP, TCP, UDP, DHCP Client, DNS Client, Telnet, HTTP, HTTPS, SMTP/TLS, SNMP v1/v2c/v3, Syslog, 802.1D-2004 RSTP, OpenVPN or IPsec VPN (peer-to-peer or peer-to-side), with a maximum VPN throughput of 37.9Mbps(*), and PPTP
ConfigurationAtop Management Utility, Web UI, Telnet, Serial Console, ATOP eNode Designer
Protocol settingeNode designer
Supported ProtocolsModbus TCP/RTU/ASCII, DNP3.0 over serial and TCP/IP, IEC61850, IEC60870-5-101, IEC60870-5-103, IEC60870-5-104
Protocol specificationsRefer to datasheet
PowerValue
Input Voltage9 - 48VDC (non-PoE Models); or through Ethernet Cable (PoE versions)
Input Current (@ 9VDC)0.65 A @ 9 VDC
Power ConsumptionApproximately 6 W (Max)
Connector3-Pin 5.08mm Lockable Terminal Block
Reverse Polarity ProtectionYes
Physical CharacteristicsValue
HousingIP30 protection, SPCC metal housing
Dimension (W x H x D)32mm x 122mm x 92mm
Weight400g
InstallationDIN-Rail , Wall mount (optional kit)
Reset ButtonYes
Environmental Limits
Operating Temperature-40°C~85°C (-40°F~185°F)
Storage Temperature-40°C~85°C (-40°F~185°F)
Ambient Relative Humidity5%~95% RH, 55°C (Non-condensing)
CertificationStandard
SafetyEN60950-1
EMCFCC Part 15, Subpart B, Class A
EN 55032, EN 61000-3-2, EN 61000-3-3, EN 55024, EN 61000-6-2, EN 61000-6-4
RoHSYes
REACHYes
StandardItemTestValueLevel
IEC 61000-4-2ESDContact Discharge±4KV2
IEC 61000-4-2ESDAir Discharge±8KV3
IEC 61000-4-3RS80-1000MHz10 V/m3
IEC 61000-4-3RS1.4~2.0GHz3 V/m2
IEC 61000-4-3RS2.0~2.7GHz1 V/m1
IEC 61000-4-4EFTAC Power Port±2.0KV3
IEC 61000-4-4EFTDC Power Port±2.0KV3
IEC 61000-4-4EFTSignal Port±1.0KV3
IEC 61000-4-5SurgeAC Power PortLine-to Line±1.0KV3
IEC 61000-4-5SurgeAC Power PortLine-to Earth±2.0KV3
IEC 61000-4-5SurgeDC Power PortLine-to Line±0.5KV2
IEC 61000-4-5SurgeDC Power PortLine-to Earth±0.5KV1
IEC 61000-4-5SurgeSignal PortLine-to Earth±1.0KV2
IEC 61000-4-6CS0.15-80MHz10 Vrms3
IEC 61000-4-8PFMFEnclosure30 A/m4
IEC 61000-4-11DIPAC Power Port30% Reduction (Voltage Dips), 25/30 Cycle-
IEC 61000-4-11DIPAC Power Port60% Reduction (Voltage Dips) : 10/12 Cycle-
IEC 61000-4-11DIPAC Power Port100% Reduction (Voltage Dips) : 1 Cycle-
IEC 61000-4-11DIPAC Power Port>95% Reduction(Voltage Dips), 0.5 period-
IEC 61000-4-11DIPAC Power Port100% Reduction (Voltage Interruption) : 250/300 Cycle-
CertificationStandard
ShockIEC 60068-2-27
DropIEC 60068-2-32
VibrationIEC 60068-2-64
Warranty5 Years
MTBF21.16 years (MIL-HDBK-217F-based prediction)
MODEL NAMELAN portsSerial portsAdditional features
PG5901-DB2x RJ451x RS-232/485/422 (D-Sub 9)-
PG5901-TB2x RJ451x RS-232/485/422 (5-pin TB)-
PG5901-PoE-DB2x RJ451x RS-232/485/422 (D-Sub 9)PoE PD (802.3af)
PG5901-PoE-TB2x RJ451x RS-232/485/422 (5-pin TB)PoE PD (802.3af)
MODEL NAMEPART NUMBERDESCRIPTION
UN315-1212(US-Y) LV650500151120003GY-Type (5.08 mm) power adaptor,100-240VAC,1.25A@12VDC out,US plug,LV6
UNE315-1212(EU-Y) LV650500151120013GY-Type (5.08 mm) power adaptor,100-240VAC,1.25A@12VDC out,EU plug,LV6
ADP-DB9(F)-TB559906231GFemale DB9 to Female 3.81mm TB5 Converter
WMK-315-Black70100000000050GBlack Aluminum Wall Mount Kit
Protocols 
04ES-01SMIEC 60870-5-104 Ethernet Server to IEC 60870-5-101 Serial Master
04ES-03SMIEC 60870-5-104 Ethernet Server to IEC 60870-5-103 Serial Master
04ES-50ECIEC 60870-5-104 Ethernet Server to IEC 61850 Ethernet Client
04ES-DNECIEC 60870-5-104 Ethernet Server to DNP3 Ethernet Client
04ES-DNSMIEC 60870-5-104 Ethernet Server to DNP3 Serial Master
04ES-MBECIEC 60870-5-104 Ethernet Server to Modbus Ethernet Client
04ES-MBSMIEC 60870-5-104 Ethernet Server to Modbus Serial Master
50ES-01SMIEC 61850 Ethernet Server to IEC 60870-5-101 Serial Master
50ES-03SMIEC 61850 Ethernet Server to IEC 60870-5-103 Serial Master
50ES-04ECIEC 61850 Ethernet Server to IEC 60870-5-104 Ethernet Client
50ES-DNECIEC 61850 Ethernet Server to DNP3 Ethernet Client
50ES-DNSMIEC 61850 Ethernet Server to DNP3 Serial Master
50ES-MBECIEC 61850 Ethernet Server to Modbus Ethernet Client
50ES-MBSMIEC 61850 Ethernet Server to Modbus Serial Master
DNES-01SMDNP3 Ethernet Server to IEC 60870-5-101 Serial Master
DNES-03SMDNP3 Ethernet Server to IEC 60870-5-103 Serial Master
DNES-04ECDNP3 Ethernet Server to IEC 60870-5-104 Ethernet Client
DNES-50ECDNP3 Ethernet Server to IEC 61850 Ethernet Client
DNES-DNSMDNP3 Ethernet Server to DNP3 Serial Master
DNES-MBECDNP3 Ethernet Server to Modbus Ethernet Client
DNES-MBSMDNP3 Ethernet Server to Modbus Serial Master
DNSS-04ECDNP3 Serial Slave to IEC 60870-5-104 Ethernet Client
DNSS-50ECDNP3 Serial Slave to IEC 61850 Ethernet Client
DNSS-DNECDNP3 Serial Slave to DNP3 Ethernet Client
DNSS-MBECDNP3 Serial Slave to Modbus Ethernet Client
MBES-01SMModbus Ethernet Server to IEC 60870-5-101 Serial Master
MBES-03SMModbus Ethernet Server to IEC 60870-5-103 Serial Master
MBES-04ECModbus Ethernet Server to IEC 60870-5-104 Ethernet Client
MBES-50ECModbus Ethernet Server to IEC 61850 Ethernet Client
MBES-DNECModbus Ethernet Server to DNP3 Ethernet Client
MBES-DNSMModbus Ethernet Server to DNP3 Serial Master
MBSS-04ECModbus Serial Slave to IEC 60870-5-104 Ethernet Client
MBSS-50ECModbus Serial Slave to IEC 61850 Client
MBSS-DNECModbus Serial Slave to DNP3 Ethernet Client

Utility

VersionNameTimeSizeDownload
v1.27eNode designer - Caution: v1.27 and newer only support Protocol Gateway version 0.58 and newer2021-04-166.49 MB
v1.26eNode designer2020-05-116.45 MB
v5.60Management Utility for Windows2021-01-0723.65 MB
v1.0Tcpdump for diagnosis_MD5checksum2021-03-291.22 MB

Firmware

VersionNameTimeSizeDownload
v0.57PG59XX DNP3.0-Ethernet-Server2021-01-07130.87 MB
v0.57PG59XX DNP3.0-Serial-Slave2021-01-07130.87 MB
v0.57PG59XX IEC60870-5-101-Serial-Slave2021-01-07130.91 MB
v0.57PG59XX IEC60870-5-104-Ethernet-Server2021-01-07130.91 MB
v0.57PG59XX IEC61850-Ethernet-Server2021-01-07130.91 MB
v0.57PG59XX Modbus-RTU-ASCII-Serial-Slave2021-01-07112.21 MB
v0.57PG59XX Modbus-TCP-Ethernet-Server2021-01-07112.18 MB
v0.53PG59XX-DNP3.0-Ethernet-Server-v0.532020-10-07109.1 MB
v0.53PG59XX-DNP3.0-Serial-Slave-v0.532020-10-07109.13 MB
v0.53PG59XX-IEC60870-5-101-Serial-Slave-v0.532020-10-07109.15 MB
v0.53PG59XX-IEC60870-5-104-Ethernet-Server-v0.532020-10-07109.07 MB
v0.53PG59XX-IEC61850-Ethernet-Server-v0.532020-10-07109.11 MB
v0.53PG59XX-Modbus-RTU-ASCII-Serial-Slave-v0.532020-10-0793.51 MB
v0.53PG59XX-Modbus-TCP-Ethernet-Server-v0.532020-10-0793.51 MB

Datasheet

VersionNameTimeSizeDownload
v1.5Datasheet EN2021-02-09353.52 KB
v1.4Datasheet EN2020-11-09353.28 KB
v1.3Datasheet EN2020-06-01349.38 KB
v1.2Datasheet EN2020-03-18349.59 KB
v1.1Datasheet EN2020-02-13349.89 KB

Manual

VersionNameTimeSizeDownload
v1.3eNode Designer User Manual DNP3.02017-09-295.57 MB
v1.3eNode Designer User Manual IEC 618502017-09-291.14 MB
v1.2eNode Designer User Manual IEC60870-5-101/1042017-09-292.59 MB
v1.3eNode Designer User Manual IEC60870-5-1032017-09-291.22 MB
v1.3eNode Designer User Manual Modbus2017-09-29946.47 KB
v1.4Getting started with Atop PG and eNode Designer2017-09-293.43 MB

Hardware Installation Guide

VersionNameTimeSizeDownload
v1.4SE5901/MB5901/PG5901 Hardware Installation Guide2021-02-222.96 MB
v1.1SE5901/MB5901/PG5901 Hardware Installation Guide2015-07-15921.06 KB